Effect on Replacement of Conventional Sand with Used Foundry Sand in Flyash Bricks

Optimization of fully replacement of natural sand by m-sand In high performance concrete with nanosilica

Abstract— In recent days the demand for river sand is increasing due to its lesser availability. Hence the practice of replacing river sand with M-Sand is taking a tremendous growth. It is also inferred from the literature that replacement of normal sand with M-Sand produces no appreciable increase in compressive strength due to the variation in the pore size of concrete at micro level. This pa...

User Guideline for Foundry Sand in Green Infrastructure Construction

Effect of compost-, sand-, or gypsum-amended waste foundry sands on turfgrass yield and nutrient content.

To prevent the 7 to 11 million metric tons of waste foundry sand (WFS) produced annually in the USA from entering landfills, current research is focused on the reuse of WFSs as soil amendments. The effects of different WFS-containing amendments on turfgrass growth and nutrient content were tested by planting perennial ryegrass (Lolium perenne L.) and tall fescue (Schedonorus phoenix (Scop.) Hol...

Geoenvironmental behavior of foundry sand amended mixtures for highway subbases.

The high cost of landfilling and the potential uses of waste foundry sands have prompted research into their beneficial reuse. Roadways have a high potential for large volume usage of the foundry sands. A laboratory testing program was conducted on soil-foundry sand mixtures amended with cement and lime to assess their applicability as highway subbase materials. The mixtures were compacted in t...

The Drying Kinetics of Protective Coatings Used on Sand Molds

Ł. Jamrozowicz, J. Zych, J. Kolczyk, AGH University of Science and Technology, Faculty of Foundry Engineering, Kraków, Poland Investigation results of the drying rate of the selected protective coatings (water and alcohol) are presented in the article. Coating drying rate was determined for the first and second layers. The coating was applied to moulding sand cores. The rate of drying coatings ...