Effect of Strain Loading Process on Grain Refinement in Aluminum Alloy
نویسندگان
چکیده
منابع مشابه
EFFECT OF COOLING RATE AND GRAIN REFINEMENT ON THE MICROSEGREGATION IN Al-4.8 wt.% Cu ALLOY
Microsegregation is one of the most important phenomena occurs during solidification. It usually results in formation of some unexpected second phases which generally affect the mechanical properties and specially reduce the workability of casting products. The aim of this research is to study the effect of cooling rate and grain refinement on the microsegregation in Al-4.8 wt.% Cu. For this p...
متن کاملInfluence of Process Parameters on Grain Refinement in AA1050 Aluminum During Cold Rolling
The microstructure evolution during cold rolling of commercial purity AA1050 aluminum is investigated through numerical simulations. A finite strain elasto-viscoplastic constitutive model is employed, where the dislocation density and average grain size are taken as variables characterizing the deformed microstructure. Grain size evolution due to dynamic recrystallization is considered and the ...
متن کاملthe effects of mechanical vibration, grain refinement and modification on the structure and mechanical properties of a380 aluminum alloy
this research concentrates on the effects of low frequency, vertical mechanical vibration during solidification on the microstructure and mechanical properties of a380 aluminum alloy. two series of sr-modified and al-5ti-b grain refined a380 alloy samples were solidified in both static and dynamic conditions in the frequency and amplitude of 60 hz and 0.2 m, respectively. their physical, micro-...
متن کاملEffect of loading rate on the plane stress fracture toughness properties of an aluminum alloy
The effect of loading rate on the plane stress fracture toughness properties of a 3.2-mm thick 2219-T87 aluminum alloy plate was investigated with center-cracked panels. Plane-stress J-resistance curves were generated at a constant displacement rate of 10-6 and 5.7 m s-l. Dynamic fracture testing was performed with a coupled pressure plates technique. Fracture initiation and propagation toughne...
متن کاملEFFECT OF GRAIN REFINEMENT AND MODIFICATION OF EUTECTIC PHASE ON SHRINKAGE OF AlSi9Cu3 ALLOY
All metals and alloys with exception of Bi are shrinking during cooling, mostly during the solidification process. In order to avoid shrinking porosity, casting process, and gating and feeding system must be properly designed. Solidification front must move towards the feeding system where solidification is then completed. No separate liquid pockets where solidification ended without feeding sh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 2002
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.66.2_101