Effect of SiC-Cu Electrode on Material Removal Rate, Tool Wear and Surface Roughness in EDM Process
نویسندگان
چکیده
منابع مشابه
Influence of Process Parameters and Electrode Shape Configuration On Material Removal Rate, Surface Roughness And Electrode Wear In Die Sinking EDM: A Review
Electrical discharge machining (EDM) is a non conventional manufacturing process which is used for shaping hard metals and forming deep complex shaped profiles by arc erosion in all kinds of electro-conductive materials. The objective of this paper is to study the influence of process parameters and electrode shape configuration on the machining characteristics such as surface quality, material...
متن کاملEffect of Cutting Parameters on Tool Wear, Surface Roughness and Material Removal Rate During Dry Turning of EN-31 Steel
ISBN 978-93-82338-21-5 | © 2012 Bonfring Abstract--The present paper is an experimental study to investigate the effect of cutting parameters (cutting speed, depth of cut and feed) on tool wear, surface roughness and material removal rate (MRR) during dry turning of EN-31 steel. Turning experiments were conducted with cutting speeds: 250, 300, 350 m/min, feeds: 0.15, 0.2, 0.25 mm/rev and depth ...
متن کاملComparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes
In this investigation, the material removal rate, tool wear rate and surface integrity obtained by EDM, ultrasonic vibrations assisted EDM and magnetic field assisted EDM were studied and compared with together to show the quality of the effects of applying each of ultrasonic vibrations to tool and magnetic field around gap distance of EDM process on material removal rate, tool wear rate, and s...
متن کاملAn Experimental Study of Surface Roughness of H11 Steel in Edm Process Using Copper Tool Electrode
In this study, the effect of input parameters of Electro Discharge Machining (EDM) process including polarity, peak current, pulse on time, duty cycle, gap voltage and concentration of abrasives powder in dielectric fluid on surface roughness are experimentally investigated. A L18 Taguchi’s standard orthogonal array is used for experimental design. Copper is used as tool electrode to machine H1...
متن کاملPongamia pinnata Plant Seed Oil as Dielectric Fluid for Electro Discharge Machining Process
Electro Discharge Machining (EDM) is a noticeable machining practice among created unconventional machining procedures for intricate, complex profiles in "hard to machine" materials, similar to heat-treated steels, composites, superalloys, ceramics, composites, carbides, and so on. In EDM, the material expulsion of the cathode is accomplished through precise controlled electric discharge (the s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering and Technology Journal
سال: 2020
ISSN: 2412-0758,1681-6900
DOI: 10.30684/etj.v38i9a.552