EFFECT OF POST WELDING HEAT TREATMENT ON MECHANICAL PROPERTIES OF GTA WELDED SA 516 GRADE 70 CARBON STEEL
نویسندگان
چکیده
منابع مشابه
Effect of Heat Treatment on Mechanical Properties of H13 Steel
This paper reports results of in-house experimentation on heat treatment and mechanical testing of H13 tool steel. Heat treatment strategy practiced by the industry is described in detail. Effect of various types of heat treatment on fracture toughness, hardness and other mechanical properties is also analyzed. It was found that toughness (expressed in terms of plane-strain fracture toughness K...
متن کاملEnhancement of mechanical properties of low carbon steel based on heat treatment and thermo-mechanical processing routes
Thermal treatments and thermo-mechanical processing routes were applied on a conventional structural steel (st37 steel: 0.12C-1.11Mn-0.16Si) for improvement of tensile properties and enhancement of work-hardening behavior. Full annealing resulted in a sheet with coarse ferrite grains and pearlite colonies arranged alternatively in distinct bands, which showed high ductility, low strength, and t...
متن کاملEffect of Different Welding Parameters on the Mechanical and Microstructural Properties of Stainless Steel 304H Welded Joints
In this research work, an attempt has been made to examine the different welding parameters which affect the weldability of 304H Austenitic stainless steel (ASS) welded joint using the proper filler wire. Chemical composition of filler wire was same as that of base metal. Further this study addressed the combined effect of various welding parameters on the metallurgical and mechanical propertie...
متن کاملEffect of Heat Input on Microstructural and Mechanical Properties of AISI 304 Welded Joint Via MIG Welding
In this experimental work, AISI 304 was welded via metal inert gas (MIG) welding process with Argon (Ar) as shielding gas. In the present study, AISI 304 was subjected to different heat input using a standard 308L electrode. Weld quality i.e. ultimate tensile strength, toughness, microhardness, and microstructure of AISI 304 were examined. Microstructures of welded joints were studied using sca...
متن کاملInvestigating the Effect of Optimum Welding Parameters on the Microstructural and Mechanical Properties of St37 Steel and 316L Stainless Steel Welded by the Friction Stir Welding Process
In this research, St37 and 316L steel sheets were welded using friction stir welding (FSW) process and effective parameters such as the rotational speed, linear speed of the tool, pin diameter, and their appropriate values were studied. The microstructure, hardness, and strength of the different welding regions were investigated. It was observed that in the stir zone (SZ), a mechanical operatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Research in Engineering and Technology
سال: 2018
ISSN: 2321-7308,2319-1163
DOI: 10.15623/ijret.2018.0707013