Effect of peak power in reactive high power impulse magnetron sputtering of titanium dioxide

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Process stabilization by peak current regulation in reactive high-power impulse magnetron sputtering of hafnium nitride

A simple and cost effective approach to stabilize the sputtering process in the transition zone during reactive high-power impulse magnetron sputtering (HiPIMS) is proposed. The method is based on real-time monitoring and control of the discharge current waveforms. To stabilize the process conditions at a given set point, a feedback control system was implemented that automatically regulates th...

متن کامل

Hysteresis-free reactive high power impulse magnetron sputtering

High power impulse magnetron sputtering (HIPIMS) of an Al target in Ar/O2 mixtures has been studied. The use of HIPIMS is shown to drastically influence the process characteristics compared to conventional sputtering. Under suitable conditions, oxide formation on the target as the reactive gas flow is increased is suppressed, and the hysteresis effect commonly observed as the gas flow is varied...

متن کامل

High power impulse magnetron sputtering discharge

J. T. Gudmundsson, N. Brenning, Daniel Lundin and Ulf Helmersson, High power impulse magnetron sputtering discharge, 2012, Journal of Vacuum Science & Technology. A. Vacuum, Surfaces, and Films, (30), 030801. http://dx.doi.org/10.1116/1.3691832 Copyright: American Vacuum Society, This article may be downloaded for personal use only. Any other use requires prior permission of the author and the ...

متن کامل

Understanding deposition rate loss in high power impulse magnetron sputtering

The lower deposition rate for high power impulse magnetron sputtering (HiPIMS) compared to direct current magnetron sputtering for the same average power is often reported as a drawback. The often invoked reason is back-attraction of ionized sputtered material to the target, due to a substantial negative potential profile from the location of ionization towards the cathode. Emitting and swept L...

متن کامل

Plasma properties in high power impulse magnetron sputtering

.....................................................................................................I PREFACE.......................................................................................................III PAPERS INCLUDED IN THE THESIS ........................................................... V RELATED PUBLICATIONS NOT INCLUDED IN THE THESIS.................... VI ACKNOWLEDGEMENTS ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Surface and Coatings Technology

سال: 2011

ISSN: 0257-8972

DOI: 10.1016/j.surfcoat.2011.04.071