Effect of P Alloy Powder Addition on Properties of Sintered Mo Powder Compacts.
نویسندگان
چکیده
منابع مشابه
Characterization of loose powder sintered porous titanium and Ti6Al4V alloy
Porous titanium and Ti6Al4V alloy, biomedical candidate materials for use in orthopedic and dental implants, were manufactured by sintering the powders at various temperatures in loose condition. The characteristics of the corresponding powders and utilized sintering temperatures limited the final porosities in the range 30-37.5 vol. %. Similar to wrought alloys, compression stress-strain curve...
متن کاملSurface Treatment of Powder Metallurgical Compacts
Introduction Powder metallurgy (p/M) is a rapidly expanding technology for manufacturing of structural parts. The PA4 process provides economical as well as technical benefits over conventional processing of wrought material. It is possible to fabricate high quality, complex parts to close tolerances without machining. The energy consumption is low and the material utilisation and productivity ...
متن کاملEffect of Slow Cooling in Reducing Pore Size in a Sintered Powder Metallurgical 6061Aluminium Alloy
The usage of powder metallurgy aluminium compacts in lieu of ferrous components in automotives helps to lower vehicle weight. The major drawback in the commercially available press sintered aluminium alloy is porosity which is mainly dependent on the powder metallurgical process parameters such as compaction pressure, sintering temperature and cooling rate after sintering. In this paper the eff...
متن کاملMagnetoresistance of Chromium Dioxide Powder Compacts
Cold-pressed powders of the half-metallic ferromagnet CrO2 are dielectric granular metals. Hysteretic magnetoresistance with maxima at the coercive field arises from interparticle contacts. Dilution with insulating antiferromagnetic Cr2O3 powder reduces the conductivity by 3 orders of magnitude, but enhances the magnetoresistance ratio which reaches 50% at 5K. The negative magnetoresistance is ...
متن کاملOn the Effect of Feedstock Preparation on the Characteristics of Warm Formed Powder Compacts
Powder compaction technology has advanced significantly over the past decades and is considered as an alternative lower-cost process to machining, casting, stamping, forging and other similar metal-working technologies. Feedstock preparation is considered a vital step in producing parts through the powder route because any inhomogeneity within the powder mass would cause inhomogeneous density d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1994
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.41.457