Effect of interference fit size on local stress in single lap bolted joints
نویسندگان
چکیده
منابع مشابه
Investigation on the Effect of Tigthening Torque on the Stress Distribution in Double Lap Simple Bolted and Hybrid (Bolted -Bonded) Joints
In this research, the effects of torque tightening on the stress distribution in double lap simple bolted and hybrid (bolted-bonded) joints have been investigated numerically. In order to determine the bolt clamping force value due to tightening torque in simple bolted and hybrid joints, which is necessary in numerical simulation, an experimental approach has been proposed. To do so, two kinds ...
متن کاملStrength Prediction in CFRP Woven Laminate Bolted Single-Lap Joints under Quasi-static Loading using XFEM
This paper is concerned with modelling damage and fracture in woven fabric CFRP single-lap bolted joints that fail by net-tension. The approach is based on the assumption that damage (matrix cracking, delamination and fibre tow fracture) initiates and propagates from the hole in a self-similar fashion. A traction-separation law (based on physically meaningful material parameters) is implemented...
متن کامل3-D Experimental and FEA Investigations of Thick Single-lap Bolted Joints
Stresses in single-lap bolted joints of thick plates are complex and difficult to analyze. The few previous studies of stress through the thickness of bolted joints have been limited to finite element simulations and have been implemented only for the joining of relatively thin plates. Experimental and numerical analyses were conducted to analyze the stress distribution inside thick bolted plat...
متن کاملAnalytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملThe Effect of Fiber Breakage on Transient Stress Distribution in a Single-Lap Joint Composite Material
In the present study, the transient stress distribution caused by a break in the fibers of an adhesive bonding is investigated. Transient stress is a dynamic response of the system to any discontinuity in the fibers from detachment time till their equilibrium state (or steady state). To derive the governing dynamic equilibrium equations shear lag model is used. Here, it is assumed that the tens...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Mechanical Engineering
سال: 2015
ISSN: 1687-8140,1687-8140
DOI: 10.1177/1687814015590307