Effect of Fiber Rupture on Tensile Properties of Short Fiber Composites
نویسندگان
چکیده
منابع مشابه
studies on properties of short fiber reinforced natural rubber composites
natural rubber/fiber composites were prepared in a laboratory mixer using new and waste short nylon fiber by a one-step mixing process. fiber loading and bonding agent effects on the microstructure and mechanical properties of the composites were studied. the cure characteristics of composites were investigated by using rheometer. cure and scorching times of the composites decreased while maxim...
متن کاملEffect of Fiber Misorientation on the Tensile Strength of Compression Molded Continuous Fiber Composites
Resin cross-flow during compression molding of unidirectional sheet molding compound composites, such as CSMC and XMC, may cause severe misorientation of the continuous fibers in the outer layers. The extent of fiber misorientation depends on the type of molding compound, the length of cross-flow, and the location of the charge in the mold. The tensile strength is reduced in the direction of cr...
متن کاملEffect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملEvaluation of Flexural and Tensile Properties of Short Kenaf Fiber Reinforced Green Composites
The present work study flexural and tensile behavior of short Kenaf fiber reinforced composites. The fibers are chemically treated in 2% NaOH solution at room temperature. Short fibers of 4mm and 8 mm are used in the present work. The composite lamina is prepared by hand molding using isopthalic polyester resin. Flexural test and tension tests are carried out as per ASTM standards. The flexural...
متن کاملEffect of inclination angle on fiber rupture load in fiber reinforced cementitious composites
A model has been formulated for analyzing the influence of fiber inclination angle on its rupture load in fiber reinforced cementitious composite. As a stiff fiber is pulled with an angle to the direction of pulling, the fiber rupture load decreases compared to the case with zero inclination angles. This phenomenon is called fiber apparent strength (defined as rupture load divided by fiber cros...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Engineering Mechanics
سال: 1995
ISSN: 0733-9399,1943-7889
DOI: 10.1061/(asce)0733-9399(1995)121:8(903)