Effect of Ag Content on Properties of Sn-Ag Binary Alloy Solder
نویسندگان
چکیده
منابع مشابه
Influence of Ag micro-particle additions on the microstructure, hardness and tensile properties of Sn-9Zn binary eutectic solder alloy
In this study, an addition of Ag micro-particles (8–10 lm) with a content in the range between 0 and 1.5 wt.% to Sn–9Zn eutectic solder, were examined in order to understand the effect of Ag additions as the particulate reinforcement on the microstructural and mechanical properties as well as the thermal behavior of the newly developed composite solders. Here, an approach to prepare a micro-com...
متن کاملHigh-Reliability Low-Ag-Content Sn-Ag-Cu Solder Joints for Electronics Applications
Sn-Ag-Cu (SAC) alloy is currently recognized as the standard lead-free solder alloy for packaging of interconnects in the electronics industry, and highAg-content SAC alloys are the most popular choice. However, this choice has been encumbered by the fragility of the solder joints that has been observed in drop testing as well as the high cost of the Ag itself. Therefore, low-Ag-content SAC all...
متن کاملCreep Behavior of a Sn-Ag-Bi Pb-Free Solder
Compression creep tests were performed on the ternary 91.84Sn-3.33Ag-4.83Bi (wt.%, abbreviated Sn-Ag-Bi) Pb-free alloy. The test temperatures were: −25 °C, 25 °C, 75 °C, 125 °C, and 160 °C (± 0.5 °C). Four loads were used at the two lowest temperatures and five at the higher temperatures. The specimens were tested in the as-fabricated condition or after having been subjected to one of two air a...
متن کاملEffect of under-bump-metallization structure on electromigration of Sn-Ag solder joints
The effect of under-bump-metallization (UBM) on electromigration was investigated at temperatures ranging from 135C to 165C. The UBM structures were examined: 5-μm-Cu/3-μm-Ni and 5 μm Cu. Experimental results show that the solder joint with the Cu/Ni UBM has a longer electromigration lifetime than the solder joint with the Cu UBM. Three important parameters were analyzed to explain the differen...
متن کاملEffects of Intermetallic Morphology at the Metallic Particle/Solder Interface on Mechanical Properties of Sn-Ag-Based Solder Joints
Mechanical incorporation of metallic particles in the Sn-Ag-based solder re sulted in various intermetallic compound (IMC) morphologies around these particles during reflow. Unlike with the Ni particles, the IMCs formed around Cu and Ag particles are relatively insensitive to reflow profiles employed. The IMC formed around the Ni particles ranges from “sunflower” morphology to “blocky” morphol...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2001
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.42.286