Dynamics and Strength of Circular Tube Open Wagons with Aluminum Foam Filled Center Sills
نویسندگان
چکیده
منابع مشابه
Fabrication of Aluminum Foam-Filled Thin-Wall Steel Tube by Friction Welding and Its Compression Properties
Aluminum foam has received considerable attention in various fields and is expected to be used as an engineering material owing to its high energy absorption properties and light weight. To improve the mechanical properties of aluminum foam, combining it with dense tubes, such as aluminum foam-filled tubes, was considered necessary. In this study, an aluminum foam-filled steel tube, which consi...
متن کاملMulti-objective Crashworthiness Optimization of the Aluminum Foam-filled Tubes
In order to reduce both the weight of vehicles and the damage of occupants in a crash event simultaneously, it is necessary to perform a multi-objective optimization of the automotive energy absorbing components. In this paper, axial impact crushing behavior of the aluminum foam-filled thin-walled tubes are studied by the finite element method using commercial software ABAQUS. Comparison of the...
متن کاملEffect of adhesive on the strengthening of aluminum foam-filled circular tubes
Studies of the crushing behavior of closed-cell, aluminum foam-filled aluminum and steel tubes have shown an interaction effect between tube wall and foam filler [1, 2, 3]. The crushing loads of foam-filled tubes are, therefore, found to be higher than the sum of the crushing loads of foam (alone) and tube (alone) mainly due to this effect. Santosa et al. [1], based on FEM results, proposed the...
متن کاملMulti-response Optimization of Grooved Circular Tubes Filled with Polyurethane Foam as Energy Absorber
The main objective of this research is to improvethe design and performance of the polyurethane foam-filled thin-walled aluminum grooved circular tubes using multi-response optimization (MRO) technique. The tubes are shaped with the inner and the outer circular grooves at different positions along the axis. For this aim, several numerical simulations using ABAQUS finite element explicit code ar...
متن کاملFabrication of Aluminum Tubes Filled with Aluminum Alloy Foam by Friction Welding
Aluminum foam is usually used as the core of composite materials by combining it with dense materials, such as in Al foam core sandwich panels and Al-foam-filled tubes, owing to its low tensile and bending strengths. In this study, all-Al foam-filled tubes consisting of ADC12 Al-Si-Cu die-cast aluminum alloy foam and a dense A1050 commercially pure Al tube with metal bonding were fabricated by ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2021
ISSN: 1996-1944
DOI: 10.3390/ma14081915