Dynamic Model for a Uniform Microwave-Assisted Continuous Flow Process of Ethyl Acetate Production
نویسندگان
چکیده
منابع مشابه
Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process
A new dynamic friction model for modeling of elliptical vibration assisted turning (EVAT) was developed in this research. The periodic change of the friction force direction is known to be one of the most important causes of this phenomenon. In modeling of machining processes (including the EVAT process), static Coulomb friction model was employed by most of the researchers. Because of the peri...
متن کاملDevelopment of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process
A new dynamic friction model for modeling of elliptical vibration assisted turning (EVAT) was developed in this research. The periodic change of the friction force direction is known to be one of the most important causes of this phenomenon. In modeling of machining processes (including the EVAT process), static Coulomb friction model was employed by most of the researchers. Because of the peri...
متن کاملA microreactor for microwave-assisted capillary (continuous flow) organic synthesis.
A capillary-based flow system has been developed for conducting microscale organic synthesis with the aid of microwave irradiation. The capillary internal diameter investigated ranged from 200 to 1200 mum, while the flow rate was varied between 2 and 40 muL/min, which corresponds to the sample being irradiated approximately 4 min. Other parameters investigated include reaction concentration and...
متن کاملIsothermal Reactor for Continuous Flow Microwave-Assisted Chemical Reaction*
An isothermal reactor in which reaction solutions can be controlled at constant temperature under constant microwave irradiation was developed. This is useful for investigating microwave effects on chemical reactions that are not observed under conventional heating conditions. We devised a structure in which a heat-transfer medium with a low dielectric loss factor, which hardly absorbs any micr...
متن کاملinvestigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Entropy
سال: 2018
ISSN: 1099-4300
DOI: 10.3390/e20040241