Dynamic Coupling Analysis on Thermo–Chemo–Mechanical Field and Fluid–Structure Interaction for Aero-Engine Turbine Blade with Functional Gradient Thermal Barrier Coatings
نویسندگان
چکیده
In this study, an extended layerwise/solid-element (XLW/SE) method is developed for the thermo–chemo–mechanical (TCM) coupling problem of aero-engine turbine blade with thermal barrier coatings (TBCs). The consists two parts, layerwise (XLW) and three-dimensional (3D) solid-element (SE) method, which are adopted to formulate governing equations TBCs substrate, respectively. Then, according compatibility conditions displacement, temperature, concentration internal force equilibrium at TBCs/substrate interface, equation final structure assembled. Through a time integration, dynamic responses temperature can be calculated. addition, fluid–structure analysis conducted by using COMSOL. nonuniform load imported into XLW/SE calculate mechanical response structure. Finally, corresponding computing program compiled C++. numerical examples, TCM on without interfacial debonding delamination damages. To validate effectiveness proposed model compared those 3D elastic generated COMSOL, shows that models in good agreement.
منابع مشابه
Atomic-scale insight and design principles for turbine engine thermal barrier coatings from theory
To maximize energy efficiency, gas turbine engines used in airplanes and for power generation operate at very high temperatures, even above the melting point of the metal alloys from which they are comprised. This feat is accomplished in part via the deposition of a multilayer, multicomponent thermal barrier coating (TBC), which lasts up to approximately 40,000 h before failing. Understanding f...
متن کاملAdvanced Thermal Barrier Coatings for Industrial Gas Turbine Engines
Executive Summary 3 Thermal barrier coating (TBC) ceramic topcoats made from Y 2 O 3-stabilized ZrO 2 (YSZ) have been used successfully in gas-turbine engine applications for more than 30 years. YSZ derives its favorable performance from a combination of properties that include low thermal conductivity, high thermal expansion coefficient, and phase stability to relatively high temperatures. Wit...
متن کاملInvestigations of Thermal Barrier Coatings for Turbine Parts
Progress in gas-turbine engine (GTE) manufacturing is continuously linked with a rise of operating temperature and stresses of engine gas path elements, especially the turbine parts. More advanced cooling systems, structural materials and thermal barrier coatings (TBC) and other coatings provide the required life and strength reliability of these components. While engines are in use, the necess...
متن کاملA Rapid Method to Achieve Aero-Engine Blade Form Detection
This paper proposes a rapid method to detect aero-engine blade form, according to the characteristics of an aero-engine blade surface. This method first deduces an inclination error model in free-form surface measurements based on the non-contact laser triangulation principle. Then a four-coordinate measuring system was independently developed, a special fixture was designed according to the bl...
متن کاملOn the delamination of thermal barrier coatings in a thermal gradient
Thermal barrier coating (TBC) systems are susceptible to delamination failures in the presence of a large thermal gradient. These failures, which occur within the TBC layer, are very different in character from those associated with the thermally grown oxide. Three possible causes of internal delamination are analyzed. In all cases, the thermomechanical properties of the TBC are allowed to vary...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coatings
سال: 2022
ISSN: ['2079-6412']
DOI: https://doi.org/10.3390/coatings12101498