Dynamic Compressive Test for Determining Stress-Strain Relation of Material

PREDICTION OF CRITICAL STRESS AND STRAIN FOR THE ONSET OF DYNAMIC RECRYSTALLIZATION IN PLAIN CARBON STEELS

The aim of the present study is the prediction of critical conditions (including critical strain and flow stress) for the initiation of dynamic recrystallization during thermo-mechanical processing of plain carbon steels. For this propose, torsion tests were conducted at different temperature (1050, 1100 and 1150˚C) and strain rates (0.002, 0.02 and 0.2/s). All flow curves showed a peak st...

Compressive Behavior of Luffa Sponge Material at High Strain Rate

The strain rate effect of luffa sponge material is an indispensable property for it to be used for acoustic, vibration, and impact energy absorption. Compressive tests at different strain rates on cylindrical column specimens of luffa sponge material were conducted over a wide density ranging from 24 to 64 kg/m. A photographic technique was applied to measure the section area of the specimen wi...

Test Plan to Update SRS HLW Tank Material Properties Database by Determining Synergistic Effects of Dynamic Strain Aging and Stress Corrosion Cracking (U)

diagnostic and developmental potentials of dynamic assessment for writing skill

این پایان نامه بدنبال بررسی کاربرد ارزیابی مستمر در یک محیط یادگیری زبان دوم از طریق طرح چهار سوال تحقیق زیر بود: (1) درک توانایی های فراگیران زمانیکه که از طریق برآورد عملکرد مستقل آنها امکان پذیر نباشد اما در طول جلسات ارزیابی مستمر مشخص شوند; (2) امکان تقویت توانایی های فراگیران از طریق ارزیابی مستمر; (3) سودمندی ارزیابی مستمر در هدایت آموزش فردی به سمتی که به منطقه ی تقریبی رشد افراد حساس ا...

Mathematical and Numerical Analysis of Elastoplastic Material with Multi-Surface Stress-Strain Relation

Acknowledgments It is my pleasure to express my thanks to my supervisors Professor Dr. C. Carstensen for suggesting this topic to me, for many valuable discussions, and for their supervision during my stays in Kiel and Munich. I wish to thank all of my colleagues at the Lehrstuhl für Wissenschaftliches Rechnen and Dr. G. Grammel for scientific advice. I am grateful to Dr. J. Alberty and R. Klos...