Dynamic characteristic analysis of spur gear system considering tooth contact state caused by shaft misalignment
نویسندگان
چکیده
The effect of gear contact state change due to shaft misalignment on meshing stiffness is usually neglected in the traditional calculation model with error, further influence mechanism dynamic characteristics also unclear. To address these shortcomings, a new mesh misaligned considering effects tooth proposed by combining improved loaded analysis (LTCA) model. Then changes aroused excitation are investigated. Moreover, system 8 degrees freedom (DOF) established, and based which investigated verified experiment. study results indicate that can be used evaluate taken into consideration. This provide theoretical method for evaluating identifying errors.
منابع مشابه
Dynamic Meshing Characteristics of Elliptic Cylinder Gear Based on Tooth Contact Analysis
As the most important working area of gear, teeth play the role of transmitting load and power. Tooth line and tooth profile are the two main characteristics of the tooth surface, which affect the shape of the tooth surface, tooth meshing characteristics and contact characteristics. Taking the elliptical cylinder gear pair in the reversing device of a new type of drum pumping unit as the resear...
متن کاملSpur Gear Tooth Stress Analysis And Stress Reduction
Gears are commonly used for transmitting power. They develop high stress concentration at the root and the point of contact. The repeated stressing on the fillets causes the fatigue failure of gear tooth. The main objective of this study is to add different shaped holes to reduce stress concentration. A finite element model of Spur gear with a segment of three teeth is considered for analysis a...
متن کاملMeshing Error of elliptic cylinder gear based on tooth contact analysis
In order to study the dynamic meshing characteristics of the elliptic cylinder gear and obtain the meshing error of the gear transmission system, the two-dimensional static contact analysis of the gear tooth surface is carried out by using ANSYS software, and the key parts of the contact area of the tooth surface are determined. Then, the dynamic meshing model of the elliptic cylinder gear is e...
متن کاملResearch on Tooth Modification of Spur Bevel Gear
Isometric modification is proposed as a new method of axial modification of spur bevel gear. Based on the gear geometry theory and the normal meshing motion equation of gear pairs, changes of meshing points and angles are analyzed and the effect of axial modification on meshing movement of gear pairs is discussed. After that, a method of drawing spherical involute with the aid of SolidWorks sof...
متن کاملNonlinear Dynamics Analysis of a Gear-Shaft-Bearing System with Breathing Crack and Tooth Wear Faults
Considering backlash, time-varying mesh stiffness and radial clearance of bearing, nonlinear dynamic model of gear bearing flexible shaft system is established taking into account breathing crack in shaft and tooth wear. Nonlinear dynamic equations are solved by Runge-Kutta method. Effect of backlash, crack in shaft and tooth wear faults on the nonlinear dynamic behavior of gear-shaft-bearing s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nonlinear Dynamics
سال: 2022
ISSN: ['1573-269X', '0924-090X']
DOI: https://doi.org/10.1007/s11071-022-07519-y