Dynamic Behaviour of Thin Cylindrical Shells Subjected to Transient Inner Pressures
نویسندگان
چکیده
منابع مشابه
Dynamic buckling of thin cylindrical shells under axial impact
The dynamic buckling of thin isotropic thermoviscoplastic cylindrical shells compressed with a uniform axial velocity prescribed at the end faces is investigated analytically and numerically. In the first part of the paper, the stressed/deformed state of a shell is assumed to have buckled if infinitesimal perturbations superimposed upon it grow. Cubic algebraic equations are derived for both th...
متن کاملImperfection-Insensitive Axially Loaded Thin Cylindrical Shells
The high efficiency of circular monocoque cylindrical shells in carrying axial loads is impaired by their extreme sensitivity to imperfections and there is an extensive body of literature that addresses this behavior. Instead of following this classical path, focused on circular cross-sections, this paper presents a novel approach that adopts optimal symmetry-breaking wavy cross-sections (wavy ...
متن کاملExperimental Investigation of Al -Thin Shells Subjected to Random Vibrations
Experiments were conducted to obtain the modal damping ratios of two hollow cylinders of different thicknesses of Aluminum. An electro dynamic exciter with slip table is used to excite the hollow cylinders. The hollow cylinder (unit under test) is fastened to the exciter. The exciter is placed in the horizontal direction and connected to the slip table. A control accelerometer is placed at the ...
متن کاملSound Transmission Through Thin Cylindrical Shells
An analysis i presented ofthe impedance presented by a thin cylindrical e astic shell to a pressure or normal stress as a function of the axial wavelength and the angular dependence of the forces. Results of computation are presented graphically. This information is then used to compute a measure of the sound transmitted through the shell immersed inair for various particular cases. The theory ...
متن کاملInvestigation of Axial to Lateral Load ratio on the Buckling of Thin Orthotropic Cylindrical Shells
Buckling analysis of thin cylindrical shells is very important due to their production process. Usually longitudinal and transversal stiffeners are used to increase the buckling stiffness. In this paper, considering a thin cylindrical shell with longitudinal and transversal ribs subjected to axial force and lateral pressure, the influence of different aspect of axial force to lateral pressure ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1976
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.42.1670