DYEING OF BANANA FIBER WITH NATURAL DYES AND FRICTION FASTNESS VALUES

Dyeing of Textiles with Natural Dyes

Dyeing Properties Using Natural Dyes from Rhubarb:

In this investigation dyeing of alginate fiber was carried out after cationic treatment of 11 EPTAC (2, 3-Epoxypropyl Trimethyl Ammonium Chloride). Optimum dyeing process and 12 parameter show good dyeing performance when alginate fiber dyed with rhubarb dye. In addition 13 to cationic treatment is taken into account for alginate fiber to improve fastness, color strength, 14 breaking strength. ...

Investigation into the Dyeing of Soybean Fibres with Natural Dyes and their antimicrobial properties

The dyeing behaviour of annually renewable soybean protein fibres with Madder, Weld and Walnut seed husk, natural dyes, were investigated and their possible antimicrobial effects were evaluated. The results obtained from the dyeing of the Madder on the soybean fabric were compared with those on a wool fabric. It was shown that the amount of the amino acid content of the fibre has a great effect...

Dyeing with Disperse Dyes

Before the First World War, almost all dyes were applied from solution in an aqueous dyebath to substrates such as cotton, wool, silk and other natural fibres. However, the introduction of a man-made fibre, cellulose acetate, with its inherent hydrophobic nature, created a situation where very few of the available dyes had affinity for the new fibre. Water-soluble anionic dyes had little substa...

Dyeing of Cotton Fabric with Natural Dyes Improved by Mordants and Plasma Treatment

Nowadays, there is a great tendency for eco-dyeing and finishing of textiles with natural products. several natural dyes have been used for dyeing of protein fibers but a low number have the ability to dye cotton fiber because of low affinity of cellulose to the natural dyes. In this study madder and weld natural colorants were used to dye cotton fabric premordanted with three metallic salt...