Dual Fluidized Bed Gasification Configurations for Carbon Recovery from Biomass

Biomass Gasification in Fluidized Bed Gasifiers Modeling and Simulation

Using woody biomass as a resource for production of biofuel, heat and power through gasification has been studied for years. In order to reduce the cost of operating and to design the full-scale gasification plant developing a general model to be applicable for different ranges of input data with acceptable level of accuracy, is needed. In order to develop such model for the gasifier, as the ma...

GASIFICATION vs COMBUSTION OF WASTE/BIOMASS IN FLUIDIZED BED REACTORS

This paper presents a comparison of commercial fluidized bed gasifiers and combustors used to recover energy from municipal solid wastes and biomass. The work reported here is excerpted from four case studies prepared for the International Energy Agency’s Bioenergy Agreement, under Task 23 (Energy from Thermal Conversion of MSW and RDF, 1998-2000) and Task 36 (Energy from Integrated Solid Waste...

Simulation of Biomass Gasification in Fluidized Bed Using Aspen Plus

Gasification is a thermo-chemical process to convert carbon-based compounds such as biomass and coal into a gaseous fuel. Among the various types of gasification methods, fluidized bed gasification is one which is considered as more efficient method than others as biomass is fluidized in a mixture of air/oxygen and steam. In the present study, a comprehensive steady state process model has been...

Effect of Fe-olivine on the tar content during biomass gasification in a dual fluidized bed

A semi-empirical model for pressurised air-blown fluidized-bed gasification of biomass.

A process model for pressurised fluidized-bed gasification of biomass was developed using Aspen Plus simulation software. Eight main blocks were used to model the fluidized-bed gasifier, complemented with FORTRAN subroutines nested in the programme to simulate hydrocarbon and NH(3) formation as well as carbon conversion. The model was validated with experimental data derived from a PDU-scale te...