Distributed series resistance effects in solar cells
نویسندگان
چکیده
منابع مشابه
Modelling and simulation of InGaP solar cells under solar concentration: Series resistance measurement and prediction
One of the important parameters, that commonly affect solar cell performances, is the series resistance. Such effect becomes more pronounced when working under higher illumination intensities due to higher generated photocurrents. Therefore, it is necessary to predict series resistance effects under such conditions. To know more about the series resistance effect and its interpretation, InGaP b...
متن کاملRapid and Accurate Determination of Series Resistance and Fill Factor Losses in Industrial Silicon Solar Cells
Lower than ideal fill factors (FF) are caused by parasitic series (Rs) and shunt (Rshunt) resistances, and non-ideal diode properties. The challenge is to quantify the FF losses quickly, simply and without ambiguity. Extracting the parameters by fitting the illuminated or dark measured data with the double diode equation is inaccurate since the externally apparent Rs is not constant; it varies ...
متن کاملTemperature effects in dye-sensitized solar cells.
In the standard solar cell technologies such as crystalline silicon and cadmium telluride, increments of temperature in the cell produce large variations in the energy conversion efficiency, which decreases at a constant rate. In dye solar cells the efficiency remains roughly constant with a maximum at around 30-40 °C and further decays above this temperature. In this work, the origin of this c...
متن کاملA miniature solar device for overall water splitting consisting of series-connected spherical silicon solar cells.
A novel "photovoltaics (PV) + electrolyzer" concept is presented using a simple, small, and completely stand-alone non-biased device for solar-driven overall water splitting. Three or four spherical-shaped p-n junction silicon balls were successfully connected in series, named "SPHELAR." SPHELAR possessed small projected areas of 0.20 (3PVs) and 0.26 cm(2) (4PVs) and exhibited working voltages ...
متن کاملHigh Efficiencies in Nanoscale Poly(3-Hexylthiophene)/Fullerene Solar Cells
A modified morphology was introduced for poly(3-hexylthiophene):phenyl-C71-butyric acid methyl ester (P3HT:PC71BM) bulk heterojunction (BHJ) solar cells by thermal and solvent annealing treatments in the presence of hydrophilic-hydrophobic block copolymers. Power conversion efficiency (PCE) plummet was prohibited during both thermal and solvent treatments for all BHJ devices modified wit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Electron Devices
سال: 1982
ISSN: 0018-9383
DOI: 10.1109/t-ed.1982.20784