Distortion-free measurement of electric field strength with a MEMS sensor
نویسندگان
چکیده
منابع مشابه
Development of a Electric Field Distortion Tactile Sensor
A tactile sensor system, based upon the electric field distortion, is proposed. Tactile sensors, detecting electric resistance or capacitance, have two opposing electrodes in general. Such structure have difficulty to make flexible sensor sheet, which is needed for robotic manipulator or other skin like sensing purpose. In this study, a sensing system with one electrode, embedded in conducting ...
متن کاملCharacterization Techniques for a MEMS Electric-Field Sensor in Vacuum
An accurate calibration of an electric-field sensor is difficult to carry out due to challenges involved in generating a uniform electric field over the sensor volume. Additionally, capacitive coupling between the field source and the sensors and related instrumentation tends to distort the measured field further. Sensor characterization includes not only calibration, but also determination of ...
متن کاملMeasurement of Field Distortion in Free-Air Ionization Chambers
A two dimensional allaJog of a free-air ionization chamber for the measurement of fi eld distortion was obtained by painting conducting lines on resistance paper to represent cross sections of the electrodes. Guard wires were simulated by driving record p layer needles into the paper . The volume of the chamber from which charge was collected was related to the resistance between two of the lin...
متن کاملElectric field measurement using a non-perturbative method based on a calibrated electric potential sensor
We present results of finite element analysis for simple test structures which demonstrate clearly that the measurement situation is complex. The test structure consists of an open geometry parallel plate capacitor within a screened enclosure. Indeed, the presence of earthed objects, even at considerable distances, is shown to have a significant effect on the field geometry close to the source....
متن کاملNew Design of Mems piezoresistive pressure sensor
The electromechanical analysis of a piezoresistive pressure microsensor with a square-shaped diaphragm for low-pressure biomedical applications is presented. This analysis is developed through a novel model and a finite element method (FEM) model. A microsensor with a diaphragm 1000 „m length and with thickness=400 µm is studied. The electric response of this microsensor is obtained with applyi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nature Electronics
سال: 2018
ISSN: 2520-1131
DOI: 10.1038/s41928-017-0009-5