Direct glycerol fuel cell with polytetrafluoroethylene (PTFE) thin film separator
نویسندگان
چکیده
منابع مشابه
Performance of a Direct Glycerol Fuel Cell using KOH Doped Polybenzimidazole as Electrolyte
Este trabalho mostra os resultados correspondentes ao estudo da influência das variáveis de operação (temperatura, concentração de glicerol, de KOH e vazão de alimentação) de uma célula a combustível de glicerol direto usando o polibenzimidazol (PBI) impregnado com KOH como eletrólito e Pt/C como catalisador. A temperatura mostra um efeito favorável até o valor limite de 75 °C, causado por melh...
متن کاملCerium silicate-based thin-film apatites: high conductivity and solid oxide fuel cell application
We report on the intermediate-temperature synthesis (973 K) and operation (<750 K) of Ce4.67(SiO4)3O-based thin-film oxy-apatites. The apatite thin films show the high conductivity of ∼0.05–0.5 S/cm and excellent stability in reducing atmosphere (<10−17 atm), which makes promising these materials as anodes for intermediate-temperature solid oxide fuel cell (SOFC) application. The proto-type SOF...
متن کاملInvestigation of surface Sr segregation in model thin film solid oxide fuel cell perovskite electrodes
While SOFC perovskite oxide cathodes have been the subject of numerous studies, the critical factors governing their kinetic behavior have remained poorly understood. This has been due to a number of factors including the morphological complexity of the electrode and the electrodeelectrolyte interface as well as the evolution of the surface chemistry with varying operating conditions. In this w...
متن کاملEffect of Polytetrafluoroethylene (PTFE) and micro porous layer (MPL) on thermal conductivity of fuel cell gas diffusion layers: Modeling and experiments
An analytic robust model is developed for estimating GDL thermal conductivity. The model considers PTFE addition to the GDL. Thermal conductivity of MPL is accurately measured in a compression range of 2e14 bar. Effect of thermal conductivity on PTFE, MPL, and compression is considered. Thermal contact resistances between GDL and MPL/iron surface are measured. a r t i c l e i n f o
متن کاملCell attachment and biocompatibility of polytetrafluoroethylene (PTFE) treated with glow-discharge plasma of mixed ammonia and oxygen.
The plasma generated from a gas mixture of NH3 plus O2 (NH3 + O2) has been used to impart unique chemical and biological characteristics to polytetrafluoroethylene (PTFE). PTFE treated with NH3 + O2 plasma was physiochemically distinct from surfaces treated with plasma of either NH3 or O2 alone, as determined by electron spectroscopy for chemical analysis (ESCA). The contact angle analysis reve...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Renewable Energy
سال: 2017
ISSN: 0960-1481
DOI: 10.1016/j.renene.2016.12.028