Direct consolidation of high speed steel powder by rotary forging.
نویسندگان
چکیده
منابع مشابه
Processing of Diamond Composites for Cutting Tools by Powder Metallurgy and Rotary Forging
This paper shows the manufacture route of the bronze 4% weight diamond composite rope for direct application as diamond wires, and linear saws in the slabbing and cutting of dimension stones. This route consists of powder mix compaction, sintering and rotary forging techniques. Tensile tests were performed, reaching an ultimate tensile strength of 230MPa for the diameter of ∅=1.84mm. Scanning e...
متن کاملCorrosion Inhibition of High Speed Steel by Biopolymer HPMC Derivatives
The corrosion inhibition characteristics of the derivatives of biopolymer hydroxypropyl methylcellulose (HPMC), hydroxypropyl methylcellulose phthalate (HPMCP), and hydroxypropyl methylcellulose acetate succinate (HPMCAS) film are investigated. Based on electrochemical impedance spectroscopic measurements and potentiodynamic polarization, the corrosion inhibition performance of high speed steel...
متن کاملDecomposition of forging die for high speed machining
Today's forging die manufacturing process must be adapted to several evolutions in machining process generation: CAD/CAM models, CAM software solutions and High Speed Machining (HSM). In this context, the adequacy between die shape and HSM process is in the core of machining preparation and process planning approaches. This paper deals with an original approach of machining preparation integrat...
متن کاملOn a Powder Consolidation Problem
The problem of the consolidation of an aerated fine powder under gravity is considered. The industrial relevance of the problem is discussed and a mathematical model is introduced. The mathematical structure is that of a coupled system for three unknowns, pressure, stress, and height of the powder in the (axisymmetric) bunker containing it. The system itself consists of a parabolic PDE, an ODE,...
متن کاملForging of Solid Powder Discs of Large Slenderness Ratio
The paper reports an investigation into the forging of solid powder circular disc with large slenderness ratio, between two flat dies. The deformation pattern during the operation is influenced by many factors, which interact with each other in a complex manner. The decisive factors are the interfacial conditions, initial relative density of the preform and the geometry of the preform. An attem...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DENKI-SEIKO[ELECTRIC FURNACE STEEL]
سال: 1991
ISSN: 1883-4558,0011-8389
DOI: 10.4262/denkiseiko.62.115