Direct Adhesion of Epichlorohydrin Rubber to Polyamide 6 During Curing Using a Molecular Adhesive

A Prediction Model for Rubber Curing Process

A prediction method for rubber curing process has historically received considerable attention in manufacturing process for rubber article with relatively large size. In recent years, there exists increasing demand for simulation driven design which will cut down the cost and time required for product development. In case of the rubber with relatively large dimensions, low thermal conductivity ...

Polyamide-rubber blends: microscopic studies of the deformation zone

The morphology of injection moulded samples of polyamide-polybutadiene blends (85.15) with an average particle size of 0.3 pm was studied. The samples were fractured in a notched tensile test at crosshead speeds of 10m4 and 1 rns-’ and the structure of the deformation zone was studied using various techniques: polarized light microscopy, scanning electron microscopy, transmission electron micro...

Metallic Coagents for Rubber-To-Metal Adhesion

Development of a Conductive / Adhesive Rubber Ink for Flexible Electrode

Extended Abstract Direct ink writing or printing techniques offer an attractive alternative for satisfying the demanding design rules and form factors required for metallic electrodes in printed electronic and optoelectronic devices. Traditionally, the micro-fabrication of conductive patterns by electroplating and etching processes accompanied by lithography is time-consuming and expensive proc...

Behavior Simulation Polyamide 6 (PA6) During Friction Stir Welding and Comparison with Experimental Results

In this study, the effects of linear speed and rotational speed of the friction stir welding tool was investigated on the heat generation and distribution of heat,the material flow and weld defect formation of the Polyamide 6 (PA6) workpiece. The commercial CFD Fluent 6.4 software package was used to the simulation of the process with computational fluid dynamic technique. The output results of...