Diamond/Cu Composites Fabricated by Pressureless Infiltration Method
نویسندگان
چکیده
منابع مشابه
Fabrication of Fe-Based Diamond Composites by Pressureless Infiltration
A metal-based matrix is usually used for the fabrication of diamond bits in order to achieve favorable properties and easy processing. In the effort to reduce the cost and to attain the desired bit properties, researchers have brought more attention to diamond composites. In this paper, Fe-based impregnated diamond composites for drill bits were fabricated by using a pressureless infiltration s...
متن کاملEffect of Titanium Addition on the Thermal Properties of Diamond/Cu-Ti Composites Fabricated by Pressureless Liquid-Phase Sintering Technique
In this study, minor-addition elements such as Si, Co, Cr, W, Mo, and Ti were added to matrix to improve the wettability between the diamonds and Cu matrix. The pressureless liquid-phase sintering technique adopted in this study provides a low-cost method for producing diamond/Cu composites with high potential for industrial mass production. Thermal properties of the diamond/Cu-Ti composites fa...
متن کاملMicrostructure and mechanical properties of pressureless sintered alumina-silver composites
The silver toughened alumina ceramics, which were fabricated via a conventional ceramic processing route using commercially available alumina and silver oxide powders as the starting materials, exhibit a higher fracture toughness (6 to 9 MPamo.5) than the monolithic alumina ceramic ( 2.5 to 3.0 MPamo.5). The weak interfacial bonding between the silver inclusions and the alumina matrix is charac...
متن کاملPorous hydroxyapatite-polyhydroxybutyrate composites fabricated by a novel method via centrifugation
Porous hydroxyapatite-polyhydroxybutyrate (HA-PHB) composites were fabricated by infiltrating PHB micro-/nanoparticles into rigid HA scaffolds via centrifugation, followed by subsequent heating at 175°C to melt the PHB into the scaffolds. HA scaffolds were obtained by heating trabecular bovine femur bone at 1350°C to remove the organic and sinter the HA. PHB particles were recovered and purifie...
متن کاملB4C-Al Composites Fabricated by the Powder Metallurgy Process
Due to the large thermal neutron absorption cross section of 10B, B4C-Al composites have been used as neutron absorbing materials in nuclear industries, which can offer not only good neutron shielding performance but also excellent mechanical properties. The distribution of B4C particles affects the mechanical performance and efficiency of the thermal neutron absorption of the composite materia...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science Discovery
سال: 2016
ISSN: 2331-0642
DOI: 10.11648/j.sd.20160402.26