Development of Ternary Blend Geopolymer Mortars
نویسندگان
چکیده
Abstract Concrete, which is now the second most consumed substance in world after water has cement as main ingredient. There a continuous increase pollution due to enormous volumes of CO 2 that are released into atmosphere during production cement. The invention geopolymer concrete proceeded reduce environmental by replacing with supplementary cementitious ingredients such flyash, GGBS, metakaolin, silica fume, etc. With sodium hydroxide and silicate functioning caustic activators, current research intends develop ternary blend flyash-based mortar using alccofine ingredients. Depending on how well binary mixes performed terms compressive strength, proportions materials were fixed. Two blends, flyash-GGBS flyash-alccofine, produced NaOH solution an 8M concentration different ratios. ratio glass was 1:2.5. Alccofine substituted 2.5%, 5%, 10%, 20% their respective blends whereas GGBS replaced 20%, 40%, 80%. On mixtures, strength test performed. results demonstrated when 40% flyash increased. composition established being, alccofine. Normal consistency tests conducted blend. replacement yielded greatest values normal all mixes. outcomes mixtures’ chosen optimal proportion acceptable.
منابع مشابه
Acid Resistance of Fly ash based Geopolymer mortars
Geopolymers are a new promising binder manufactured by activation of a solid aluminosilicate source material with a highly alkaline activating solution and aided by heat. Fly ash, considered to be a waste material is rich in silica and alumina and hence can be used as a source material for manufacture of Geopolymers. These binders have been reported to achieve high early strength and better dur...
متن کاملPreparation and Characterization of New Geopolymer-Epoxy Resin Hybrid Mortars
The preparation and characterization of metakaolin-based geopolymer mortars containing an organic epoxy resin are presented here for the first time. The specimens have been prepared by means of an innovative in situ co-reticulation process, in mild conditions, of commercial epoxy based organic resins and geopolymeric slurry. In this way, geopolymer based hybrid mortars characterized by a differ...
متن کاملMorphological Control Agent in Ternary Blend Bulk Heterojunction Solar Cells
Bulk heterojunction (BHJ) organic photovoltaic (OPV) promise low cost solar energy and have caused an explosive increase in investigations during the last decade. Control over the 3D morphology of BHJ blend films in various length scales is one of the pillars accounting for the significant advance of OPV performance recently. In this contribution, we focus on the strategy of incorporating an ad...
متن کاملPFO-DBT:MEH-PPV:PC71BM Ternary Blend Assisted Platform as a Photodetector
We present a ternary blend-based bulk heterojunction ITO/PEDOT:PSS/PFO-DBT: MEH-PPV:PC71BM/LiF/Al photodetector. Enhanced optical absorption range of the active film has been achieved by blending two donor components viz. poly[2,7-(9,9-di-octyl-fluorene)-alt-4,7-bis(thiophen-2-yl)benzo-2,1,3-thiadiazole] (PFO-DBT) and poly(2-methoxy-5(2'-ethylhexyloxy) phenylenevinylene (MEH-PPV) along with an ...
متن کاملPolymer nanofibers: preserving nanomorphology in ternary blend organic photovoltaics.
The morphology of donor-acceptor blends holds the key to good performance through the balancing of good exciton dissociation efficiency and interconnectivity for good charge collection. In this work, the good morphology is preserved in ternary blend systems through the use of poly(3-hexylthiophene) (P3HT) nanofibers. The iridium(III)-based metal complex is incorporated in P3HT-PCBM blends as a ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP conference series
سال: 2022
ISSN: ['1757-899X', '1757-8981']
DOI: https://doi.org/10.1088/1755-1315/1086/1/012059