Development of Lithium Dimethyl Phosphate as an Electrolyte Additive for Lithium Ion Batteries
نویسندگان
چکیده
منابع مشابه
Electrolyte and Solid-Electrolyte Interphase Layer in Lithium-Ion Batteries
The supply and the management of the energy are particularly at the centre of our daily concerns and represent a socio-economic priority. Indeed, while cars use fossil fuel as the main source of energy for over a century, the depletion of the oil reserves and the necessity to reduce the carbon dioxide emissions, stimulate the development of electric vehicles. Therefore, one of the main challeng...
متن کاملElectrode Materials for Lithium Ion Batteries: A Review
Electrochemical energy storage systems are categorized into different types, according to their mechanisms, including capacitors, supercapacitors, batteries and fuel cells. All battery systems include some main components: anode, cathode, an aqueous/non-aqueous electrolyte and a membrane that separates anode and cathode while being permeable to ions. Being one of the key parts of any new electr...
متن کاملAdvanced gel polymer electrolyte for lithium-ion polymer batteries
In order to keep abreast with the rapid development of portable electronic equipment, improving the performance of polymer electrolytes has therefore become our goal of research. This work improved performance of Li-ion polymer batteries through advanced gel polymer electrolytes (GPEs). Comparing with liquid type Electrolyte, Gel type Polymer Electrolyte (GPE) had the advantage of a wide variet...
متن کاملA PEO-based gel polymer electrolyte for lithium ion batteries
A lithium-ion conducting gel polymer electrolyte (GPE) membrane containing PEO as a polymer host and liquid electrolyte has been prepared by a simple one-step procedure. The prepared electrolyte membrane exhibits a good ionic conductivity of 3.3 10 3 S cm 1 and high lithium transference number of 0.76 at room temperature. Meanwhile, the gel polymer electrolyte membrane shows very good thermal s...
متن کاملInitial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries
Nanostructured manganese cobalt oxide spinel (MnCo2O4) are prepared by co-precipitation method and calcined at 650 and 750°C. Morphological studies show that by increasing the calcination temperature from 650 to 750°C, morphology of the particles changes from quasi-plate to polyhedral. The MnCo2O4 calcined at 650°C could deliver an initial discharge capacity of 1438 mAh g-1 under current densit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Electrochemical Society
سال: 2016
ISSN: 0013-4651,1945-7111
DOI: 10.1149/2.1131607jes