Development of High-Pressure Technique for Low Temperature Physics. Magnetic Measurements under High Pressure.
نویسندگان
چکیده
منابع مشابه
A compact bellows-driven diamond anvil cell for high-pressure, low-temperature magnetic measurements.
We present the design of an efficient bellows-controlled diamond anvil cell that is optimized for use inside the bores of high-field superconducting magnets in helium-3 cryostats, dilution refrigerators, and commercial physical property measurement systems. Design of this non-magnetic pressure cell focuses on in situ pressure tuning and measurement by means of a helium-filled bellows actuator a...
متن کاملPreserving Proteins Under High Pressure and Low Temperature
Our group has a continuing interest in devising new freezing-protection agents. To this end, we have systematically investigated the structure of aqueous electrolyte salt solutions and room-temperature ionic liquids (RTILs), which consist of the cations and anions. We found that such water-mixed solutions remain liquid even at 1.0 GPa and 77 K (achieved by rapid cooling at 500 K/min) (Imai et a...
متن کاملLow-temperature olivine rheology at high pressure
San-Carlos olivine rheology was investigated at pressure (P) up to 9 GPa and temperature (T) lower than 890 ◦C. Six powder specimens were cold compressed and sintered into dense and compact materials, then deformed during relaxation experiments carried out at constant pressure and temperature in DIA-type cubic-anvil apparatus. Sample elastic strain was monitored during relaxation by in situ X-r...
متن کاملConsiderations of Well Cementing Materials in High-Pressure, High-Temperature Conditions (RESEARCH NOTE)
As worldwide demand of hydrocarbon is growing fast, the oil and gas companies have been forced to explore reservoirs with more hostile conditions, such as high-pressure, high-temperature conditions. Improved technology, material selection and testing procedures are required to overcome the common problems in these conditions. One of the main phases of well construction is cementing job. Appropr...
متن کاملHigh-Temperature Pressure Transducers
Pressure sensing systems operating at temperatures >200 °C are required for a variety of presentand next-generation applications ranging from oil field instrumentation to turbine engine control. Quite often, part or all of the sensing system must be physically removed from the hightemperature environment. In some cases, pressure translating devices and capillary tubes are used to isolate the se...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Review of High Pressure Science and Technology
سال: 2001
ISSN: 0917-639X,1348-1940
DOI: 10.4131/jshpreview.11.181