Development of High Performance Intermediate Temperature Proton-Conducting Solid Oxide Electrolysis Cells
نویسندگان
چکیده
منابع مشابه
Advanced BaZrO3-BaCeO3 Based Proton Conductors Used for Intermediate Temperature Solid Oxide Fuel Cells (ITSOFCs)
..................................................................................................................................... i Supplements and Contribution statement ............................................................................ iii Acknowledgements ................................................................................................................... v Table of
متن کاملLa0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study
In this study the characteristics of two different kinds of La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) powders, one in-house synthesized powder by a co-precipitation method and another one purchased from Fuel Cell Materials Co. (FCM Co., USA), were compared. The co-precipitated powder was prepared by using ammonium carbonate as precipitant with a NH4+/NO3- molar ratio of 2 and calcination at 1000C for 1 h....
متن کاملProton Conducting Membranes for High Temperature Fuel Cells with Solid State “water Free” Membranes
A “water free,” proton conducting membrane for use in a fuel cell is fabricated as a highly conducting sheet of converted solid state organic amine salt, such as converted acid salt of triethylenediamine with two quaternized tertiary nitrogen atoms, combined with a nanoparticulate oxide and a stable binder combined with the converted solid state organic amine salt to form a polymeric electrolyt...
متن کاملHigh-Temperature Proton-Conducting Ceramics Developed
with the perovskite structure and with the trivalent cation (M) substitution at the B-site to introduce oxygen vacancies. The high affinity for hydrogen ions (H) is advantageous for protonic transport, but it increases the reactivity toward water (H2O) and carbon dioxide (CO2), which can lead to premature membrane failure. In addition, there are considerable technological challenges related to ...
متن کاملPerformance of an Intermediate-Temperature Fuel Cell Using a Proton-Conducting Sn0.9In0.1P2O7 Electrolyte
Performance of a fuel cell using Sn0.9In0.1P2O7 as the electrolyte was evaluated in the temperature range of 150–300°C under unhumidified conditions. The IR drop and electrode overpotential of the cell were measured separately by the current interruption method. The dc conductivity values of the electrolyte between 150 and 300°C, estimated from the IR drop, were comparable to the ac conductivit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Transactions
سال: 2017
ISSN: 1938-6737,1938-5862
DOI: 10.1149/08009.0167ecst