Development of a Powder Metallurgical Self Cooling Forging Die with Inner Cavities
نویسندگان
چکیده
منابع مشابه
Effect of Slow Cooling in Reducing Pore Size in a Sintered Powder Metallurgical 6061Aluminium Alloy
The usage of powder metallurgy aluminium compacts in lieu of ferrous components in automotives helps to lower vehicle weight. The major drawback in the commercially available press sintered aluminium alloy is porosity which is mainly dependent on the powder metallurgical process parameters such as compaction pressure, sintering temperature and cooling rate after sintering. In this paper the eff...
متن کاملSurface Treatment of Powder Metallurgical Compacts
Introduction Powder metallurgy (p/M) is a rapidly expanding technology for manufacturing of structural parts. The PA4 process provides economical as well as technical benefits over conventional processing of wrought material. It is possible to fabricate high quality, complex parts to close tolerances without machining. The energy consumption is low and the material utilisation and productivity ...
متن کاملEnhancement of hot forging die life using different methods
Forging dies at high temperatures are under contact pressure, variable mechanical loads and thermal shock, furthermore they should withstand wear and friction in a high level. So, in order to increase die life, the selection of die material, coating and hardness is essential. In this review, various methods used for die life enhancement such as carbide coating, using the super alloy stellite 6 ...
متن کاملExperimental Study of Upsetting and Die Forging with Controlled Impact
The results from experimental research of deformation by upsetting and die forging of lead specimens wit controlled impact are presented. Laboratory setup for conducting the investigations, which uses cold rocket engine operated with compressed air, is described. The results show that when using controlled impact is achieving greater plastic deformation and consumes less impact energy than at o...
متن کاملClose-die Flashless Forging in Automotive Industry
This paper describes the possibilities and conditions of the closed-die flashless forging process using conventional mechanical presses and equipment. The technique of driven gear forging with an internal flash or with special die design has been developed. The quality of forgings is comparable to that achievable on Hatebur presses. Furthermore the problem of how to increase shift production un...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Technology
سال: 2014
ISSN: 2212-0173
DOI: 10.1016/j.protcy.2014.09.005