Development of 4-Bar Linkage Orthotic Knee Joint

Conventional 4-bar linkage knee mechanisms: a strength-weakness analysis.

The purpose of this article is to inform clinicians of the relevant knowledge gained from research in the field of prosthetics. From a biomechanical point of view, clinicians need relevant knowledge in order to properly prescribe a lower limb prosthesis, including prosthetic components. In this context, and due to the lack of data regarding their utility, a strength-weakness analysis of 8 types...

Dynamic Behavior Analysis of a Planar Four-bar Linkage with Multiple Clearances Joint

 In practice, clearances in the joints are inevitable due to tolerances, and defects arising from design and manufacturing. In the presence of clearance at a joint, a mechanism gains some additional, uncontrollable degrees of freedom which are the source of error. Moreover, joints undergo wear and backlashes and so cannot be used in precision mechanisms. In this study, the dynamic behaviour of ...

Development of Torque Sensor with High Sensitivity for Joint of Robot Manipulator Using 4-Bar Linkage Shape

The torque sensor is used to measure the joint torque of a robot manipulator. Previous research showed that the sensitivity and the stiffness of torque sensors have trade-off characteristics. Stiffness has to be sacrificed to increase the sensitivity of the sensor. In this research, a new torque sensor with high sensitivity (TSHS) is proposed in order to resolve this problem. The key idea of th...

The description of the human knee as four-bar linkage.

PURPOSE We investigate the dependence of the kinematics of the human knee on its anatomy. The idea of describing the kinematics of the knee in the sagittal plane using four-bar linkage is almost as old as kinematics as an independent discipline. We start with a comparison of known four-bar linkage constructions. We then focus on the model by H. Nägerl which is applicable under form closure. M...

Compliance for a cross four-bar knee joint