Development of 10kW Peak-Power Pulsed Single-Mode Fiber Laser
نویسندگان
چکیده
منابع مشابه
High peak power pulsed single-mode linearly polarized LMA fiber amplifier and Q-switch laser
We report on the recent progress in the design and development of completely monolithic linearly-polarized pulsed fiber amplifiers seeded by Q-switched fiber laser oscillators. We demonstrate near diffraction limited beam quality with ~20kW peak power (1mJ pulse energy, ~45nsec) pulses and an average power ~20W at 20kHz repetition rate with linearly polarized (>17dB PER) output from a simple MO...
متن کاملA Monolithic Thulium Doped Single Mode Fiber Laser with 1.5ns Pulsewidth and 8kW Peak Power
Here we report a compact monolithic 2000nm pulsed laser with a single spatial mode output, ~1.5ns pulse duration, 8kW peak power and >200mW average power at 20 kHz repetition rate. The gain-switched laser, consisting of a pair of fiber Bragg gratings and 0.5m of thulium-doped single cladding fiber, was core pumped by a high peak power pulsed 1.5 m laser. When the input pulse energy of the 20 kH...
متن کاملFiber Laser Coherent Array for Power Scaling of Single-Mode Fiber Laser
Coherent beam combining of many fiber lasers by the Y-shaped complex resonator method realizes both power scaling and spectral narrowing. The basic characteristics of this Y-shaped coherent array, scalability of power summation, and bandwidth narrowing property are presented. As high as 85% addition efficiency with only a few longitudinal-modes was obtained in an array of eight 10-nm bandwidth ...
متن کاملGenerating photoacoustic signals using high-peak power pulsed laser diodes
Photoacoustic signals are usually generated using bulky and expensive Q-switched Nd:YAG lasers, with limited scope for varying the pulse repetition frequency, wavelength and pulse width. An alternative would be to use laser diodes as excitation sources; these devices are compact, relatively inexpensive, and available in a wide variety of NIR wavelengths. Their pulse duration and repetition rate...
متن کاملHigh-Power Pulsed 2-μm Tm-Doped Fiber Laser
Tm3+-doped fiber is very suitable for producing ~2-μm laser emission due to its several unique advantages. First, Tm3+-doped fiber has a strong absorption spectrum that has good overlap with the emission spectrum of commercially available AlGaAs laser diodes. Second, the specific energy-level structure of Tm3+ ions provides the Tm3+-doped fiber laser (TDFL) quantum efficiency close to two throu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Review of Laser Engineering
سال: 2007
ISSN: 0387-0200,1349-6603
DOI: 10.2184/lsj.35.793