DEVELOPMENT AND WEAR CHARACTERIZATION OF AL7075/AL2O3/SIC HYBRID PARTICULATE METAL MATRIX COMPOSITE DEVELOPED BY STIR CASTING
نویسندگان
چکیده
منابع مشابه
Study on Iraqi bauxite ceramic reinforced Aluminum metal matrix composite synthesized by stir casting
For the past decades researchers are showing immense interest to investigate the natural advantage of preparation of composites from minerals such as bauxite particles, and proved their effectiveness as cost effective reinforcing agents in fabrication of high performance composites. This study, is a new attempt in using the Iraqi natural bauxite powder with different proportions (2wt%, 4wt%, an...
متن کاملEffect of Hexagonal Boron Nitrate on Microstructure and Mechanical Behavior of Al7075 Metal Matrix Composite Producing by Stir Casting Technique
Al7075 alloy reinforced with h-Boron Nitrate (BN) composites were processed by stir casting technique. The produced composite was subjected to microstructural studies using OLYMPUS -BX51M, tensile, hardness, density and wear tests. Tensile strength and hardness were found to increase by 12.8% and 20% respectively due to increased dislocation density with the addition of reinforcement. Microstru...
متن کاملInfluence of Nano Reinforced Particles on the Mechanical Properties of Aluminium Hybrid Metal Matrix Composite Fabricated by Ultrasonic Assisted Stir Casting
During the past few decades, materials design has shifted emphasis to pursue low cost, quality, light weight, environment friendliness, and performance. Aluminium matrix composites are important class of engineering materials used in aerospace, automotive, engineering, defence and other industries because of their lower density, higher specific strength, and better physical and mechanical prope...
متن کاملStudy on tool wear and surface roughness in end milling of particulate aluminum metal matrix composite: Application of response surface methodology
Metal matrix composites have been widely used in industries, especially aerospace industries, due to their excellent engineering properties. However, it is difficult to machine them because of the hardness and abrasive nature of reinforcement elements like silicon carbide particles (SiCp).In the present study, an attempt has been made to investigate the influence of spindle speed (N), feed rate...
متن کاملFabrication of Al/Graphite/Al2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite
Friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized Al2O3 and micro sized graphite particles. A mixture of Al2O3 and graphite particles was packed into a groove with 1 mm width and 4.5 mm depth, which had been cut in 5083 aluminum plate of 10 mm thick. Packed groove was subjected to friction stir processing in order to im...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Research in Engineering and Technology
سال: 2015
ISSN: 2321-7308,2319-1163
DOI: 10.15623/ijret.2015.0420004