Development and Characterization of Fe-Based Friction Material Made by Hot Powder Preform Forging for Low Duty Applications
نویسندگان
چکیده
منابع مشابه
Development and Characterization of Synthetic Tissue- Equivalent Material for CT Imaging Applications
Introduction: The use of a simple tissue analog material in the fabrication of medical computed tomography (CT) imaging phantoms has great potential to help researchers. The purpose of the present study is to develop new gel tissue-equivalent materials and determine whether their CT numbers and relative electron densities vary in CT images obtained by scans at different energie...
متن کاملpreparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis
کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.
Production of Tantalum Powder by Magnesiothermic Reduction of Feed Preform
To develop an effective process for tantalum powder production, a new preform reduction process (PRP) based on the magnesiothermic reduction of feed preform containing tantalum oxide (Ta2O5) was investigated. The feed preformwas fabricated from slurry, which was made by mixing Ta2O5 powder, flux (e.g., CaCl2), and binder. Various compositions of preform in the form of plates were prepared using...
متن کاملDifferent methods of forging; applications and obstacles
Forging is a manufacturing process that consists of shaping the metal using localized compression forces. The blows are delivered with a hammer (often an electric hammer) or a die. In this paper, different methods of forging (multi-directional forging, hot forging, near-beta forging, multi-axial forging, direct powder forging, warm forging and ring forging) are discussed. The main problems that...
متن کاملAn Upper Bound Solution for Closed Die Forging of Sintered Polygon
The paper reports on an investigation into the various aspects of closed die cold forging of polygonal powder preforms, which have been compacted and sintered from atomized powder. It is found that for certain dimensional ratios of the preform the die pressure is minimum. An attempt has been made for the determination of the die pressures developed for given geometries of the disc during the cl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Minerals and Materials Characterization and Engineering
سال: 2011
ISSN: 2327-4077,2327-4085
DOI: 10.4236/jmmce.2011.1013093