Determination of saturated and a-unsaturated aliphatic aldehydes in environmental water samples by GC.

application and construction of carbon paste modified electrodes developed for determination of metal ions in some real samples

ساخت الکترودهاِی اصلاح شده ِیکِی از چالشهاِی همِیشگِی در دانش شیمِی بوِیژه شیمِی تجزیه مِی باشد ،که با در نظر گرفتن سادگِی ساخت، کاربردی بودن و ارزان بودن روش مِی توان به باارزش بودن چنِین سنسورهاِی پِی برد.آنچه که در ادامه آورده شده به ساخت و کاربرد الکترودهاِی اصلاح شده با استفاده از نانو ذرات در اندازه گِیرِی ولتامترِی آهن وکادمِیم اشاره دارد. کار اول اختصاص دارد به ساخت الکترود خمِیر کربن اصلاح شده با لِیگاند داِ...

Determination of unsaturated hydraulic conductivity by internal drainage assuming a uniform soil water profile

Determination of N-nitrosodimethylamine in environmental aqueous samples by isotope-dilution GC/MS-SIM.

An analytical method for the determination of N-nitrosodimethylamine (N-NDMA) in environmental aqueous samples has been developed using isotope dilution gas chromatography/mass spectrometry in the selected ion monitoring mode (GC/MS-SIM). After deuterated N-nitrosodimethylamine (d6-N-NDMA) as surrogate standard was added to the samples, the analytes were extracted with methylene chloride, dried...

Determination of Butyltin Compounds in Environmental Samples by Isotope Dilution GC-MS Application

A GC-MS with electron impact ionization was used for the development of a speciation method for the simultaneous determination of monobutyl-, dibutyl-, and tributyltin in environmental samples (waters, sediments, and biota). The method is based on the use of a mixed spike containing Sn-enriched monobutyltin (MBT), dibutyltin (DBT), and tributyltin (TBT) for isotope dilution analysis. The mixed ...

Utilization of electrodeposition on a graphite probe modified with palladium in determination of lead by graphite furnace atomic absorption spectrometry in water and environmental samples

In this work a rapid and selective procedure for separation and preconcentration of lead(Pb2+) before determination by electrothermal atomic absorption spectrometry (ETAAS) wasdeveloped. The procedure is based on the electrodeposition on a graphite probe modified withpalladium. The lead was deposited from acetate buffer solution at pH 5.5. Various parameters,such as pH of solutions, deposition ...