Determination of Phosphorus Removal Mechanism in Aerated and Unaerated Steel Slag Filter System as Secondary Treatment System for Textile Industrial Wastewater

نویسندگان

چکیده

Phosphorus is the element that promotes growth in plant. However, over loading of phosphorus into surfaces water leads to severe environmental problems known as eutrophication. Improper treatments removal prior discharges from industrial effluent are one contributions Textile sources surface with concentration 1-9 mg/L P. Since attentions given removing color effluent, commonly ignored wastewater treatment system. Thus, study textile conducted using steel slag system filter under aerated (ASSF) and unaerated (USSF) condition. The systemwas set up for influent pHrange 5.30-7.00 at primary treated wastewaterfor wastewaterunder Sampling was done twice a week 12 weeksand analyzed Total concentration. Activated Carbon(ACF)filterin existing also sampled compare efficiency USSFfilter shows better than ASSFfilter with46% 70%of removal.Meanwhile, ASSF 37% 66%.The adsorbate formed SEM-EDX precipitation USSF XRD.This provides promising result removal.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

performance of biological system and advanced oxidation processes (aop) treating antibiotic production industrial wastewater

در این مطالعه، عملکرد دو سیستم اکسیداسیون شیمیایی پیشرفته و یک سیستم بیولوژیکی برای حذف آموکسی سیلین در فاضلاب های سنتزیدر غلظت های مشابه با موارد صنعتی مورد بررسی قرار گرفته شدند. مطالعه انجام شده دارای سه بخش متفاوت اکسیداسیون با ازن و اشعه uv، اکسیداسیون با استفاده از نانو فتوکاتالیست tio2 و استفاده از بیوراکتور هوازی لجن فعال با جداکننده های فیزیکی می باشد. در هر بخش، متغیر های متفاوتی متنا...

15 صفحه اول

Basic Oxygen Furnace steel slag and apatite for sustainable phosphorus removal at small wastewater treatment plants

Recent developments in phosphorus (P) removal have focused on P reactive materials to use within constructed wetlands (CW), as a sustainable alternative to chemical dosing. In this study, different fractions of Basic Oxygen Furnace (BOF) steel slag and apatite media have been tested in full-scale CWs, being the first trial of its kind in the United Kingdom evaluating the P removal capacity of b...

متن کامل

Removal of Cu & Zn from industrial wastewater by using steel industry waste ( Slag ) as an adsorbent

Department of Applied Sciences & Humanities, Moradabad Institute of Technology, Ram Ganga Vihar Phase – 2, Moradabad-244001 Abstract The removal of two heavy metals Cu and Zn from their aqueous solution, using steel industry slag as an adsorbent was studied as slag consist of calcium oxide, aluminum oxide, magnesium oxide etc. The research is a bench scale experimental type and analysis have pe...

متن کامل

removal of cadmium from industrial wastewater by steel slag

the steel slag is the main by-product of steel industry. the aim of this study using the steel slag as a low-cost absorbent in order to remove cadmium pollutant from industrial wastewater. some factors that affect the process of cadmium removal by steel slag such as ph, contact time, absorbent dosage and cadmium initial concentration has been studied. standard solution of synthetic wastewater i...

متن کامل

Simultaneous carbon and nitrogen removal from municipal wastewater in full-scale unaerated/aerated submerged filters.

Characterization and evaluation of a biological submerged filter was carried out on a full-scale pilot plant performing removal of biochemical oxygen demand (BOD) and total nitrogen (TN) from pre-treated urban wastewater. The average influent values of BOD5, chemical oxygen demand (COD) and TN were 370, 1,015 and 60 mg/L, respectively. The pilot plant produced good discharge quality during stea...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International Journal of Integrated Engineering

سال: 2022

ISSN: ['2229-838X', '2600-7916']

DOI: https://doi.org/10.30880/ijie.2022.14.09.014