Desulfurization and Deashing of Coal by Alkaline Solutions. (Part 2).

Desulfurization of Coal

Coal Desulfurization by Solvent Leaching Methods

Coal desulfurization prior to usage is a preprocessing in order to achieve clean fuel and reduce environmental impacts such as acid rain. Desulfurization of Lakhra (Pakistan) coal was conducted with different solvents. Coal was leached with different solvents like hot water, H2O2/H2SO4 and HNO3. It was found that the effects of the leaching temperature, agitation time and particle size on the r...

Desulfurization of coal by HNO3 leaching: Optimization of influential factors using Box-Behnken design

Sulfur is one of the most significant impurities in coal, which reduces the quality of coal and also results in environmental pollution. This work was aimed to investigate the removal of sulfur from coal by the leaching method employing parameters expected to affect the removal rate such as acid concentration (10-30%), temperature (40-80 °C), and reaction time (40-100 min). A response surface m...

Core-in-shell sorbent for hot coal gas desulfurization

A core-in-shell sorbent is described herein. The core is reactive to the compounds of interest, and is preferably calcium-based, such as limestone for hot gas desulfurization. The shell is a porous protective layer, preferably inert, which allows the reactive core to remove the desired compounds while maintaining the desired physical characteristics to withstand the conditions of use.

Hot Coal Gas Desulfurization With Manganese-Based Sorbents

The objective of this project is to develop a pellet formulation which is capable of achieving low sulfur partial pressures and a high capacity for sulfur, loaded from a hot fuel gas and which is readily regenerable. Furthermore the pellet must be strong for potential use in a fluidized bed and regenerable over many cycles of loading and regeneration. Regeneration should be in air or oxygen-dep...