Design Study for HybriSCU: A HYBRID NbTi/ReBCO Superconducting Undulator
نویسندگان
چکیده
At the European X-ray Free-Electron Laser (XFEL), undulator systems group has started in 2020 an R&D project dedicated to development of innovative superconducting (SCU) coils. SCUs are great interest for storage rings and free electron lasers (FEL) facilities as they enable widen tunability range generated photon energy same beam compared with established technology permanent magnet undulators. In this contribution, we present characterization study achievable performance HybriSCU a graded SCU coil combining two different superconductors: NbTi high temperature superconductor (HTS) based on Rare-Earth Barium Copper Oxide (ReBCO) tape.
منابع مشابه
A Superconducting Short Period Undulator
Superconducting in-vacuo undulators reach higher fields at lower periods compared to permanent magnet undulators. After the first successful tests of such an undulator with beam in Mainz [1] and an analysis of the emitted radiation a team consisting of members of ACCEL and the Research Center Karlsruhe began to build a superconducting undulator for the 2.5 GeV storage ring ANKA. In this paper (...
متن کاملConceptual Design of a Hybrid-Type Elliptically Polarizing Undulator*
There are several means of generating circularly polarized light. The use of an electromagnetic helical device is very popular for the experiments using lower photon energy radiation. An advantage of the electromagnetic device is the capability of fast switching of polarization. However, due to its complicated structure and a limited maximum current, construction of a shorter period (< 100 mm) ...
متن کاملDesign considerations for a 1As SASE undulator
The various technologies available to build a SASE-type undulator for a 1As wavelength are compared. This includes permanent magnets, superconducting and room-temperature electromagnets for both the planar and helical-"eld con"gurations. Following a 3D computation of the magnetic "eld, general expressions are given for the peak "eld as a function of the undulator period. The growth length and s...
متن کاملDesign and fabrication of a prototype planar undulator
The main goal of this work is to get the fabrication technology of the insertion devices. A prototype undulator with the period of 48mm and the peak magnetic field of 0.75 T has been fabricated using NdFeB-SH35 magnets based on the cooperation between ILSF and NSTRI. The total magnet length is 483 mm and the number of periods is 8. The magnetic parameters of the undulator are determined in orde...
متن کاملField Enhancement of a Superconducting Helical Undulator with Iron
The productions of positrons in sufficient quantities is one of the necessities for either the TESLA or the S-Band Linear Collider project. One of the promising possibilities is to guide the high energy electron beam through a superconducting helical undulator producing synchrotron radiation which would in turn be directed onto a target for positron production [1]. A helical undulator has two a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Applied Superconductivity
سال: 2023
ISSN: ['1558-2515', '1051-8223']
DOI: https://doi.org/10.1109/tasc.2023.3259329