Design A Precision Motion Control of an Upper Limb Robotic Arm
نویسندگان
چکیده
Trajectory tracking is utilized in medical rehabilitation programs at the early stage of order to track performance patient performing prescribed task. The robotic arm has been accomplish this due it precision and provide repetitive motion. goal study design simulate a two-degree-of-freedom that can effectively trajectory. As result, discusses modelling, simulation, control Two Degree Freedom (2-DOF) Robot Arm attain goal. First, robot specifications are provided, as well forward inverse kinematics 2-DOF arm. dynamics were then defined using Euler- Lagrange Equation obtain motion equations. A PID controller was used construct for robot's controller. MATLAB record all data, including margin error, overshoot, peak settling time. data identified PI controllers, which error smaller than 7 1.5, respectively. create prototype model by Sim Mechanics. obtained indicates best fit robot.
منابع مشابه
Control of a 2-DoF robotic arm using a P300-based brain-computer interface
In this study, a novel control algorithm, based on a P300-based brain-computer interface (BCI) is fully developed to control a 2-DoF robotic arm. Eight subjects including 5 men and 3 women perform a 2-dimensional target tracking in a simulated environment. Their EEG (Electroencephalography) signals from visual cortex are recorded and P300 components are extracted and evaluated to perform a real...
متن کاملAn LPV Approach to Sensor Fault Diagnosis of Robotic Arm
One of the major challenges in robotic arms is to diagnosis sensor fault. To address this challenge, this paper presents an LPV approach. Initially, the dynamics of a two-link manipulator is modelled with a polytopic linear parameter varying structure and then by using a descriptor system approach and a robust design of a suitable unknown input observer by means of pole placement method along w...
متن کاملDynamics and Motion Control of Wheeled Robotic Systems
Mobile robotic systems, which include a mobile platform with one or more manipulators, mounted at specific locations on the mobile base, are of great interest in a number of applications. In this paper, after thorough kinematic studies on the platform and manipulator motions, a systematic methodology will be presented to obtain the dynamic equations for such systems without violating the base n...
متن کاملDynamics and Motion Control of Wheeled Robotic Systems
Mobile robotic systems, which include a mobile platform with one or more manipulators, mounted at specific locations on the mobile base, are of great interest in a number of applications. In this paper, after thorough kinematic studies on the platform and manipulator motions, a systematic methodology will be presented to obtain the dynamic equations for such systems without violating the base n...
متن کاملMotion Control of Robotic Arm with Command Shaping Method
In the manufacturing industry, lots of rapid point-to-point motion is required while the residual vibration is unfavorable. Residual vibrations caused by flexible elements are limiting the performance of mechanical system, especially when the system needs to make rapid point-to-point motion. As proved in earlier studies, avoiding natural frequencies of the mechanical system reduces the residual...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mekatronika
سال: 2022
ISSN: ['2637-0883']
DOI: https://doi.org/10.15282/mekatronika.v4i2.8941