Densification behavior of tungsten heavy alloy based on master sintering curve concept
نویسندگان
چکیده
منابع مشابه
SURFACE HARDENING OF TUNGSTEN-BASED HEAVY ALLOY VIA PACK BORONIZING
The boronizing of a tungsten heavy alloy containing Ni and Fe as the major alloying elements were performed in the present study to increase its surface hardening. Pack cementation method was employed as a well-known, successful solid-state process for boronizing. The coating treatment was accomplished at different temperatures of 1000, 1050 and 1100°C for 6 and 9 hours. The formation of tu...
متن کاملComputer Study of Skeletal Settling Combined with Extrication of Solid Phase Domains during Liquid Phase Sintering of Tungsten Heavy Alloy
In this paper, we investigated numerically gravity induced skeletal settling during liquid phase sintering. The microstructural evolution will be simulated by simultaneous computation of displacement of the center of mass and mass transport due to dissolution and precipitation at the interfaces between solid-phase and liquid matrix. Common to this study based on domain methodology for definitio...
متن کاملMaster sintering curve for Gd-doped CeO2 solid electrolytes
The sintering behavior of gadolinia-doped ceria powders was studied by the master sintering curve (MSC). Dilatometric analyses of powders produced by a soft chemical method were performed to provide the experimental data set for the construction of the MSC. The assumed model provided good fittings of the MSC and the activation energy for the sintering of Ce1-xGdxO3-d, with x = 0, 0.05, 0.1, and...
متن کاملSintering Effects on the Densification of Nanocrystalline Hydroxyapatite
The effects of sintering profiles on the densification behaviour of synthesized nanocrystalline hydroxyapatite (HA) powder were investigated in terms of phase stability and mechanical properties. A wet chemical precipitation method was successfully employed to synthesize a high purity and single phase HA powder. Green HA compacts were prepared and subjected to sintering in air atmosphere over a...
متن کاملData on the densification during sintering of binder jet printed samples made from water- and gas-atomized alloy 625 powders
Binder jet printing (BJP) is a metal additive manufacturing method that manufactures parts with complex geometry by depositing powder layer-by-layer, selectively joining particles in each layer with a polymeric binder and finally curing the binder. After the printing process, the parts still in the powder bed must be sintered to achieve full densification (A. Mostafaei, Y. Behnamian, Y.L. Krime...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions A
سال: 2006
ISSN: 1073-5623,1543-1940
DOI: 10.1007/bf02586116