Degradation of Alumina and Magnesia Chrome refractory bricks in Portland cement kiln – Corrected version*
نویسندگان
چکیده
منابع مشابه
Solidification/Stabilization of Lead Contaminated Soil Using Magnesia Phosphate cement and Ordinary Portland cement
Background and objectives: Solidification/stabilization is an effective technique for reducing the leachability of contaminants in soils. Magnesia phosphate cement and ordinary Portland cement can be used to remediate soils contaminated. In this study, the performance of the solidified/stabilized soil was compared for mixtures composed of magnesia phosphate and ordinary Portland cement. Materia...
متن کاملInvestigation of the Effect of high Alumina Cement on the Properties of Foamed Alumina Insulation Bricks
The purpose of this study was to investigate the effect of high alumina cement and Sintering temperature on microstructure, physical and mechanical properties of foamed alumina insulation bricks. The Slurry samples were prepared containing 75wt% of alumina and 25% wt of deionised water containing 1%, 3%, 5%, 7% wt% high Alumina cement and 2% wt% foam. Then samples were poured into metal molds....
متن کاملNEW REFRACTORY MATERIALS FOR THE COPPER INDUSTRY
Wear of various basic refractory materials to substitute to currently used magnesia chrome bricks has been studied, measuring matte and slag penetration and dissolution, through different cup and rotary slag tests. High magnesia with and without impregnation, magnesia graphite, magnesia-alumina spinel with and without impregnation, olivine-magnesia and olivine magnesia- graphite bricks, as well...
متن کاملINFLUENCE OF NANO SILICA ON PROPERTIES AND MICROSTRUCTURE OF HIGH ALUMINA ULTRA-LOW CEMENT REFRACTORY CASTABLES
Colloidal silica bonded refractory castables have been developed recently. It was found that colloidal silica is one of the best binders can substitute other binders such as cement in No Cement Castable (NCC) and Ultra Low Cement Castable (ULCC) refractories. Also composition of colloidal silica with appropriate additives resulted in a gel form which makes the initial strength. Moreover, the na...
متن کاملFormation and Techniques for Control of Sulfur Dioxide and Other Sulfur Compounds in Portland Cement Kiln Systems
This report presents the chemical and physical factors governing the generation of sulfur dioxide (SO2), its transformation into other sulfur compounds, and the removal of sulfur oxides within the cement kiln system. Sulfur in cement kilns is derived from both kiln feed and from the kiln fuel. The form of the sulfur dictates the location in the kiln where the SO2 generation takes place. Sulfur ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2014
ISSN: 2261-236X
DOI: 10.1051/matecconf/20141101048