Decoration of CuO NWs Gas Sensor with ZnO NPs for Improving NO2 Sensing Characteristics

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Characterization of ZnO Nanobelt-Based Gas Sensor for H2, NO2, and Hydrocarbon Sensing

A conductometric H2, NO2, and hydrocarbon gas sensor based on single-crystalline zinc oxide (ZnO) nanobelts has been developed. The nanobelt sensitive layer was deposited using a radio frequency (RF) magnetron sputterer. The microcharacterization study reveals that the nanobelts have a single crystal hexagonal structure with average thickness and width of about 10 and 50 nm, respectively. The s...

متن کامل

ZnO nanoparticles as sensing materials with high gas response for detection of n-butanol gas

The high crystallinity ZnO nanoparticles with an average particle diameter 30 nm have been successfully synthesized with a surfactant-mediated method. The cationic surfactant (cetyltrimethylammonium bromide, CTAB) and the hydrous metal chlorides (ZnCl2⋅2H2O) appear to be the good candidates for obtaining a high yield of nanoparticles. The structural and morphological characterizations were carr...

متن کامل

CuO-Decorated ZnO Hierarchical Nanostructures as Efficient and Established Sensing Materials for H2S Gas Sensors

Highly sensitive hydrogen sulfide (H2S) gas sensors were developed from CuO-decorated ZnO semiconducting hierarchical nanostructures. The ZnO hierarchical nanostructure was fabricated by an electrospinning method following hydrothermal and heat treatment. CuO decoration of ZnO hierarchical structures was carried out by a wet method. The H2S gas-sensing properties were examined at different work...

متن کامل

CuO nanowire gas sensors for air quality control in automotive cabin

CuO nanowires (NWs) were grown by the thermal oxidation of Cu foil at 400 ◦C and gas sensors were fabricated by the deposition of a solution containing the CuO NWs. At 300–370 ◦C, the sensor resistance increased upon exposure to 30–100ppm CO. This has been explained by the gas sensing characteristics of the p-type oxide semiconductor. In contrast, the sensor showed two opposite NO2 sensing beha...

متن کامل

Fabrication and NO2 gas sensing performance of TeO2-core/CuO-shell heterostructure nanorod sensors

UNLABELLED TeO2-nanostructured sensors are seldom reported compared to other metal oxide semiconductor materials such as ZnO, In2O3, TiO2, Ga2O3, etc. TeO2/CuO core-shell nanorods were fabricated by thermal evaporation of Te powder followed by sputter deposition of CuO. Scanning electron microscopy and X-ray diffraction showed that each nanorod consisted of a single crystal TeO2 core and a poly...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Sensors

سال: 2021

ISSN: 1424-8220

DOI: 10.3390/s21062103