Damage Signature of Fatigued Fabric Reinforced Plastics in the Pulsed Ultrasonic Polar Scan
نویسندگان
چکیده
منابع مشابه
Impact Damage in Woven Fabric Reinforced Composites
INTRODUCTION Very often, woven fabrics are used as the reinforcement in advanced composite materials. Although the resulting inplane stiffness is lower than of their unidirectional counterparts, the excellent drapability of these materials eases the production of more general doubly curved components. In addition, the inherently low out-of-plane strength of these layered materials improves due ...
متن کاملUltrasonic Examination of Fiber Reinforced Plastics Using Phased Array Transducers
This paper presents a data fusion method between the results of ultrasound using phased array at 5MHz frequency and those obtained through eddy current examination at 1-10MH frequency. The obtained results are compared with destructive tests, a very good correlation being obtained. The effects of delamination over the properties of CFRP are studied using dynamic mechanical analyzer, emphasizing...
متن کاملThe Ultrasonic Polar Scan for Composite Characterization and Damage Assessment: Past, Present and Future "2279
In the early 1980’s, the ultrasonic polar scan (UPS) technique was developed to assess the fiber direction of composites in a nondestructive way. In spite of the recognition by several researchers as being a sophisticated and promising methodology for nondestructive testing (NDT) and materials science, little advance was made during the following 30 years. Recently however, the UPS technique ex...
متن کاملEvaluation of the Fiberglass-Reinforced Plastics Interfacial Behavior by using Ultrasonic Wave Propagation Method
In this paper, ultrasonic wave propagation in three phases (3P) of composite materials was investigated. The simulation was conducted by PZFlex analysis code, a time domain finite element program. The reflection and transmission characteristics with different shapes of middle layer between glass fiber and epoxy resin are investigated in order to understand basic ultrasonic behavior of energy di...
متن کاملEffect of chisel edge in ultrasonic assisted drilling of carbon fibre reinforced plastics (CFRP)
Ultrasonic assisted drilling (UAD) has been reported effective for thrust force reduction during drilling of CFRP resulting in lower exit delamination. However, this process is not fully understood in relation to machining theory. This work focused on understanding the separate effects of chisel and cutting edges during UAD in comparison with conventional drilling (CD). Experiments were perform...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Experimental Mechanics
سال: 2014
ISSN: 0014-4851,1741-2765
DOI: 10.1007/s11340-014-9933-8