Damage Analysis of Aluminum Matrix Composite Considering Non-Uniform Distribution of SiC Particles.
نویسندگان
چکیده
منابع مشابه
Fatigue Damage and Lifetime of SiC/SiC Ceramic-Matrix Composite under Cyclic Loading at Elevated Temperatures
In this paper, the fatigue damage and lifetime of 2D SiC/SiC ceramic-matrix composites (CMCs) under cyclic fatigue loading at 750, 1000, 1100, 1200 and 1300 °C in air and in steam atmosphere have been investigated. The damage evolution versus applied cycles of 2D SiC/SiC composites were analyzed using fatigue hysteresis dissipated energy, fatigue hysteresis modulus, fatigue peak strain and inte...
متن کاملModelling and Numerical Computation of Thermal Expansion of Aluminium Matrix Composite with Densely Packed SiC Particles
The coefficient of thermal expansion (CTE) is one of the most important physical properties of metal matrix composites (MMCs). The thermal expansion response is correlated to the microstructure, the deformation of the matrix, and the internal stress conditions. In the present study the physical CTE of aluminium matrix composite (AMC) reinforced with 70 vol. % SiC particles is analytically compu...
متن کاملan investigation into the wear behaviour of aluminum (aa2124) matrix composite reinforced with intermetallic mosi2 particles
in the present work, the aa2124/25vol.%mosi2 composite was produced by powder metallurgy technique. the aluminum alloy 2124 powder was produced by gas atomization method and the mosi2 intermetallic particles were produced through combustion synthesis. the aa2124 matrix powder was mechanically blended with 25vol.%mosi2 using a ball milling mixer. the blended powder mixture was encapsulated and t...
متن کاملUltrasonic assisted turning of an aluminium-based metal matrix composite reinforced with SiC particles
In this study, diamond turning of an aluminiumbased metal matrix composite (MMC) reinforced with SiC particles was conducted with the assistance of ultrasonic vibrations. A simple and small size vibration device was designed to mount a piezoelectric transducer and a diamond insert onto a CNC machine. Turning experiments were carried out using a factorial design to investigate the effects of vib...
متن کاملStudy on damping capacity and dynamic Young’s modulus of aluminium matrix composite reinforced with SiC particles
The development of high damping materials for noise reduction and attenuation of vibration on structural applications, such as automotive and aerospace industries, has been investigated. This experimental study is concerned with the damping capacity (tan delta) and dynamic Young’s modulus (|E*|) of Silicon carbide (SiC) reinforced aluminium (Al) matrix composite. AlSi-SiCp composite was produce...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1997
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.63.2366