Cutting Performance of CBN Tools in Cutting of Sintered Steel.

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Cutting Force Prediction in End Milling Process of AISI 304 Steel Using Solid Carbide Tools

 In the present study, an attempt has been made to experimentally investigate the effects of cutting parameters on cutting force in end milling of AISI 304 steel with solid carbide tools. Experiments were conducted based on four factors and five level central composite rotatable design. Mathematical model has been developed to predict the cutting forces in terms of cutting parameters such as he...

متن کامل

A Comparative Study of Tool Life Between Ceramic and CBN Cutting Tools when Machining 52100 Steel and Optimization of Cutting Parameters

This paper describes a comparison of tool life between ceramics and cubic boron nitride (CBN) cutting tools when machining hardened steels using the Taguchi method. An orthogonal design, signal-to-noise ratio (S/N) and analysis of variance (ANOVA) were employed to determine the effective cutting parameters on the tool life. The results indicated that the V was found to be a dominant factor on t...

متن کامل

Elliptical Vibration Cutting of Steel with Diamond Tools

Diamond turning of steel alloys is impractical due to catastrophic tool wear caused by a combination of chemical and abrasive wear. In the literature, several modifications of the cutting process have been proposed, e.g. cutting in an inert gas atmosphere, cryogenic cutting and vibration assisted cutting, e.g. elliptical vibration cutting (EVC) [1-5]. In this work, the EVC method was investigat...

متن کامل

Modeling of hard part machining: effect of insert edge preparation in CBN cutting tools

High speed machining of hardened steels for manufacturing dies and molds offers various advantages, but the productivity often limited by mainly tool life. This study investigates the influence of edge preparation in cubic boron nitrite (CBN) cutting tools on process parameters and tool performance by utilizing practical finite element (FE) simulations and high speed orthogonal cutting tests. T...

متن کامل

The Effects of ZrO2 or Tic on the Performance of the Alumina-Based Ceramic Cutting Tools

Two types of alumina-based cutting tools with compositions of 90 vol.% Al2O3+10 vol.% ZrO2 and 80 vol.% A12O3+20 vol.% TiC are produced by isostatic pressing and sintering technique. The effects of these additives on the mechanical properties and cutting performance of these materials are investigated. The tool life in both materials is examined under identical conditions on cutting a grey cast...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy

سال: 2002

ISSN: 0532-8799,1880-9014

DOI: 10.2497/jjspm.49.773