Crystallography of precipitates in Mg alloys
نویسندگان
چکیده
منابع مشابه
ATOM PROBE CHARACTERIZATION OF PREPRECIPITATE CLUSTERS AND PRECIPITATES IN Al-Mg-Si(-Cu) ALLOYS
Pre-precipitation clustering and chemical nature of the metastable precipitates in aged Al-Mg-Si(-Cu) alloys have been investigated by atom probe field ion microscopy (APFIM) and transmission electron microscopy (TEM) for better understanding of the two-step aging behavior and the effect of excess Si. After a prolonged natural aging, co-clusters of Mg and Si atoms are observed in addition to se...
متن کاملPrecipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys
The present study contains a critical review of work on the formation of precipitates and intermetallic phases in dilute precipitation hardening Al–Cu–Mg based alloys with and without Li additions. Although many suggestions for the existence of pre-precipitates in Al–Cu–Mg alloys with a Cu/Mg atomic ratio close to 1 have been made, a critical review reveals that evidence exists for only two tru...
متن کاملNanoscale precipitates strengthened lanthanum-bearing Mg-3Sn-1Mn alloys through continuous rheo-rolling
We elucidate the effect of lanthanum (La) on the microstructure and mechanical properties of Mg-3Sn-1Mn-xLa (wt.%) alloy plates processed through continuous rheo-rolling for the first time. At x = 0.2 wt.%, La dissolved completely in the α-Mg matrix. As the La content was increased to 0.6 wt.%, a new plate-shaped three-phase compound composed of La5Sn3, Mg2Sn and Mg17La2 phases was formed with ...
متن کاملEXPERIMENTALl ANALYSIS OF PARTITION COEFFICIENT IN Al-Mg ALLOYS
Because the partition coefficient is one of the most important parameters affecting microsegregation, the aim of this research is to experimentally analyse the partition coefficient in Al-Mg alloys. In order to experimentally measure the partition coefficient, a series of quenching experiments during solidification were carried out. For this purpose binary Al-Mg alloys containing 6.7 and 10.2 w...
متن کاملQuasicrystal-reinforced Mg alloys
The formation of the icosahedral phase (I-phase) as a secondary solidification phase in Mg-Zn-Y and Mg-Zn-Al base systems provides useful advantages in designing high performance wrought magnesium alloys. The strengthening in two-phase composites (I-phase + α-Mg) can be explained by dispersion hardening due to the presence of I-phase particles and by the strong bonding property at the I-phase/m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Magnesium and Alloys
سال: 2021
ISSN: 2213-9567
DOI: 10.1016/j.jma.2020.06.013