Crud Removal Performance with Ion Exchange Resins in BWR Plants.

Removal of Copper from Aqueous Solution by Ion Exchange Resins

[Ion exchange resins].

Ion exchange resins have been used to help formulate pharmaceuticals since the late 1950's. During that time they have proved to be safe and effective excipients and are now used in many commercial formulations throughout the world. In this article we will look at some of the common problems faced by formulators and how using ion exchange resins may be able to solve them. Ion exchange resins ar...

Deodorizing experiments with ion exchange resins.

In a previous report (1), the differences in the carbon number of the lower fatty acids contained in cutaneous secretions such as axillary sweat, smegma, and dandruff, were considered as factors responsible for the difference in odor between osmidrotic and non-osmidrotic subjects. Besides these there are ammonia constituents and volatile salts (trimethylamine, methylamine) which may take part i...

Preliminary Adsorption study for Heavy Metal Removal with Ion-Exchange Resins in the Teaching Laboratory

This paper reports on the adsorption of Cr(VI), Cu(II) and Pb(II) from laboratory solution by the use of Chelex 100 (C100) and Amberlite IRA400 ion exchange resins. Metal loading at initial pHs of 3 to 8 at 1-100 mg/L were studied based on Q max and K f values of the Langmuir and Freundlich isotherm models, respectively. Lead was sorbed the most (Q max = 75.19 mg/g, at pH 6), followed by Cu (Q ...

Copper(II) Removal using Three Cation Exchange Resins: Ion Exchange Equilibrium and Kinetics

The removal of copper from aqueous solution by Amberjet 1500H, Amberjet 1300H and Amberlite IRC86 ion exchange resins is described. The Amberjet 1500H shows a remarkable increase in sorption capacity for copper compared to other adsorbents. The adsorption process shows maximum removal of copper in pure aqueous solution for an initial copper concentration of 5.98 mmol/L. The metal ions adsorptio...