COUPLED TESTS OF LATERAL-TORSIONAL BUCKLING AND WEB BUCKLING OF PLATE GIRDERS UNDER BENDING
نویسندگان
چکیده
منابع مشابه
Buckling and failure characteristics of slender web I-column girders under interactive compression and shear
Geometric and material nonlinear behavior of slender webs in I-column girders having stocky flanges under the action of combined lateral and axial loads is investigated. Interaction curves corresponding to the application of compressive and shear loads at buckling and ultimate stages for both web plates and column sections are plotted. In addition, the effects of flange and web slenderness rati...
متن کاملbuckling and failure characteristics of slender web i-column girders under interactive compression and shear
geometric and material nonlinear behavior of slender webs in i-column girders having stocky flanges under the action of combined lateral and axial loads is investigated. interaction curves corresponding to the application of compressive and shear loads at buckling and ultimate stages for both web plates and column sections are plotted. in addition, the effects of flange and web slenderness rati...
متن کاملThe effect of discrete lateral and torsional bracings stiffness on the elastic lateral-torsional buckling of mono-symmetric I beam, under the concentrated moment
When the out-of-plane stiffness of a beam is remarkably lower than the in-plane stiffness, the lateral-torsional buckling occurs. In this study, the behavior of mono-symmetric I-beams with discrete torsional and lateral bracings under the concentrated moment is investigated using the finite element analyses. Then, based on the numerical analyses, equation for the stiffness requirement is propos...
متن کاملFlexural -Torsional Buckling Tests of Cold-Formed Lipped Channel Beams Under Restrained Boundary Conditions
In this paper, tests on flexural buckling ( Lateral – Torsional ) of cold-formed steel(CFS) lipped Channel beams under restrained boundary conditions are described Two point loading for flexural tests have been established for 3.0m span to obtain uniform bending moment. The section sizes selected for testing are 100x50x10 mm, 100x50x15 mm and 100x50x20 mm with 1.6mm and 2.0mm thickness for the ...
متن کاملAnalysis of Bending and Buckling of Circular Porous Plate Using First-Order Shear Deformation Theory
Porous materials are lightweight, flexible and resistant to hairline cracks, so today with the development of technology porous structure produced for use in various industries. This structure widely use in beams, plates and shells. The purpose of this paper is to investigate the effect of porosity in axial symmetry in bending and buckling load sheet for analysis. For this purpose, a circular p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshu
سال: 1988
ISSN: 0289-7806,1882-7187
DOI: 10.2208/jscej.1988.392_335