Corrosion Properties of the Fe-Cr-Based Soft Magnetic Alloys Fabricated by Metal Injection Molding

Fabrication of Soft Magnetic Fe-based Nanoalloy

The Fe-Ni-Sb-B amorphous alloy has been prepared by a solid-solid chemical reaction of ferric trichloride, nickel chloride, antimony chloride and potassium borohydride powders at room temperature. The inductive couple plasma study indicates that the resultant is composed of Fe 5.38 %, Ni 56.19 %, Sb 29.02 % and B 0.44 %. The XRD and thermal analysis show that the alloy is a non-strict sense amo...

control of the optical properties of nanoparticles by laser fields

در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...

Magnetic properties of Fe embedded in V and Cr: Thin films and dilute alloys

Crystallization behavior and magnetic properties of Cu-containing Fe–Cr–Mo–Ga–P–C–B alloys

Multicomponent Fe65.5Cr4Mo4Ga4P12C5B5.5 amorphous alloy is known to have good soft magnetic properties combined with large glass-forming ability. Searching for a nanocrystalline structure that could improve its magnetic properties, Cr and Mo were partially substituted by Cu. The devitrification process of Cu-containing alloys shows an additional broad crystallization event that can be described...

Magnetic Properties of Platinum Metal Alloys

A number of the papers presented at the International Conference on Magnetism held at the University of Nottingham in September dealt with alloys of the platinum metals. The proceedings will be published shortly by the Institute of Physics and the Physical Society. Papers describing neutron diffraction studies demonstrated the powerfulness of some of the recently developed techniques. Thus G. G...