Copper Electrodeposition on a Magnesium Alloy (AZ80) with a U-Shaped Surface
نویسندگان
چکیده
منابع مشابه
Copper Electrodeposition on a Magnesium Alloy (AZ80) with a U-Shaped Surface
Cu electrodeposition was performed on a cylindrical AZ80 substrate with a U-shaped surface. A uniform deposition of Cu was achieved on an AZ80 electrode via galvanostatic etching, followed by Cu electrodeposition in an eco-friendly alkaline Cu plating bath. Improper wetting and lower rotational speeds of the AZ80 electrode resulted in an uneven Cu deposition at the inner upper site of the U-sha...
متن کاملKinetics of SIMA AZ80 Magnesium Alloy
Semi-solid feedstock of AZ80 magnesium alloy modified by [trace] rare-earth Y element 10 (0, 0.2, 0.4, 0.8 wt.%) were fabricated by [strain-induced melting activation] (SIMA) in the form of 11 extrusion and partial remelting. The effect of Y addition on the microstructure evolution of [the] 12 extruded and [isothermally heat] treated alloy was observed by [using an] optical microscope (OM), 13 ...
متن کاملHardness evolution of AZ80 magnesium alloy processed by HPT at different temperatures
Discs of an extruded AZ80 magnesium alloy were processed by high-pressure torsion (HPT) using 6.0 GPa up to 10 turns at different temperatures (296 K and 473 K). The disc surfaces and cross-sectional planes were examined before and after processing using scanning electron microscopy (SEM) and Vickers microhardness (Hv). The microhardness results at the surface show differences in the strength o...
متن کاملMitigation of Corrosion on Magnesium Alloy by Predesigned Surface Corrosion
Rapid corrosion of magnesium alloys is undesirable in structural and biomedical applications and a general way to control corrosion is to form a surface barrier layer isolating the bulk materials from the external environment. Herein, based on the insights gained from the anticorrosion behavior of corrosion products, a special way to mitigate aqueous corrosion is described. The concept is based...
متن کاملThe Optimization of U-shaped Cross Section Antenna with a Strip on a U-shaped Ground Plane for WLAN Applications
This article proposes an approach to increase the efficiency of the U-shaped cross section antenna. The Optimization of a wideband U-shaped cross section antenna on a U-shaped ground plane is presented suitable for WLAN in various applications. The proposed antenna has been developed from a single element of U-shaped cross-sectional antenna. A single element is easy to be composed for installin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2014
ISSN: 1996-1944
DOI: 10.3390/ma7117366