Compositional Gradient at the Interface of Metal-Nonmetal Composite Electroplating Films on Metal Substrates
نویسندگان
چکیده
منابع مشابه
Effect of Interface Undulations on the Thermal Fatigue of Thin Films and Scales on Metal Substrates
Oxide scales that form on superalloys eventually spall, especially upon thermal cycling. This phenomenon is motivated by the large residual compression in the oxide. Buckling and interface crack propagation are known aspects of this behavior, but the origin of the interface separation that precedes and activates buckling is not understood. One mechanism is described and analyzed in this article...
متن کاملDeformability of thin metal films on elastomer substrates
Recent applications in flexible electronics require that thin metal films grown on elastomer substrates be deformable. However, how such laminates deform is poorly understood. While a freestanding metal film subject to tension will rupture at a small strain by undergoing a necking instability, we anticipate that a substrate will retard this instability to an extent that depends on the relative ...
متن کاملFailure by simultaneous grain growth, strain localization, and interface debonding in metal films on polymer substrates
In a previous paper, we have demonstrated that a microcrystalline copper film well bonded to a polymer substrate can be stretched beyond 50% without cracking. The film eventually fails through the coevolution of necking and debonding from the substrate. Here we report much lower strains to failure (approximately 10%) for polymer-supported nanocrystalline metal films, the microstructure of which...
متن کاملElectroplating lithium transition metal oxides
Materials synthesis often provides opportunities for innovation. We demonstrate a general low-temperature (260°C) molten salt electrodeposition approach to directly electroplate the important lithium-ion (Li-ion) battery cathode materials LiCoO2, LiMn2O4, and Al-doped LiCoO2. The crystallinities and electrochemical capacities of the electroplated oxides are comparable to those of the powders sy...
متن کاملEVALUATION OF PRESSURE EFFECT ON HEAT TRANSFER COEFFICIENT AT THE METAL- MOLD INTERFACE FOR CASTING OF A356 AL ALLOY
Abstract: During solidification and casting in metallic molds, the heat flow is controlled by the thermal resistance at the casting-mold interface. Thus heat transfer coefficient at the metal- mold interface has a predominant effect on the rate of heat transfer. In some processes such as low pressure and die-casting, the effect of pressure on molten metal will affect the rate of heat transfer a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Colour Material
سال: 1998
ISSN: 0010-180X
DOI: 10.4011/shikizai1937.71.170