Comparison of cutting tool insert's made of oxide cutting ceramic machining of grey cast iron
نویسندگان
چکیده
منابع مشابه
Cutting Forces and Tool Wear Investigation for Face Milling of Bimetallic Composite Parts Made of Aluminum and Cast Iron Alloys
Bimetallic parts are used in many industries for weight and cost reduction of workpieces working under high loads and wear. One application for this type of composite material is in automotive industry. In this work the tool wear and cutting forces in the face milling of bimetallic parts made of aluminum and cast iron were investigated. A356 and GG25 alloys that are common materials for bimetal...
متن کاملEvaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy
Despite the fact that Titanium material has been considered as difficult to cut material, its usage has been increasing day by day in all engineering sectors; wherever criticality is encountered. Many studies are going on in view of increasing tool life at high cutting speed to improve productivity. In this study, attempt has been made to see the effect of iron as a partial substitution along ...
متن کاملSelection of Cutting Inserts in Dry Machining for Reducing Energy Consumption and CO2 Emissions
Manufacturing processes are responsible for climate change due to the emissions produced as result of energy consumption. This paper analyzes the influence of the cutting conditions and the characteristics of cutting tools on the energy required in machining processes and the carbon dioxide equivalent (CO2-eq) emissions generated per material removed ratio (MRR) in an effort to define common cr...
متن کاملcomparison of catalytic activity of heteropoly compounds in the synthesis of bis(indolyl)alkanes.
heteropoly acids (hpa) and their salts have advantages as catalysts which make them both economically and environmentally attractive, strong br?nsted acidity, exhibiting fast reversible multi-electron redox transformations under rather mild conditions, very high solubility in polar solvents, fairly high thermal stability in the solid states, and efficient oxidizing ability, so that they are imp...
15 صفحه اولA Comparative Study of Tool Life Between Ceramic and CBN Cutting Tools when Machining 52100 Steel and Optimization of Cutting Parameters
This paper describes a comparison of tool life between ceramics and cubic boron nitride (CBN) cutting tools when machining hardened steels using the Taguchi method. An orthogonal design, signal-to-noise ratio (S/N) and analysis of variance (ANOVA) were employed to determine the effective cutting parameters on the tool life. The results indicated that the V was found to be a dominant factor on t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Manufacturing Technology
سال: 2009
ISSN: 1213-2489,1213-2489
DOI: 10.21062/ujep/x.2009/a/1213-2489/mt/9/1/57